[net-next,v2,1/1] net: stmmac: Add dma_wmb() barrier before setting OWN bit in set_rx_owner()
Eric Dumazet
edumazet at google.com
Wed Aug 21 00:57:23 PDT 2024
On Wed, Aug 21, 2024 at 8:03 AM <ende.tan at starfivetech.com> wrote:
>
> From: Tan En De <ende.tan at starfivetech.com>
>
> Currently, some set_rx_owner() callbacks set interrupt-on-completion bit
> in addition to OWN bit, without inserting a dma_wmb() barrier in
> between. This might cause missed interrupt if the DMA sees the OWN bit
> before the interrupt-on-completion bit is set.
>
> Thus, this patch adds dma_wmb() barrier right before setting OWN bit in
> each of the callbacks. Now that the responsibility of calling dma_wmb()
> is delegated to the callbacks, let's simplify main driver code by
> removing dma_wmb() before stmmac_set_rx_owner().
>
> Signed-off-by: Tan En De <ende.tan at starfivetech.com>
> ---
> v2:
> - Avoid introducing a new function just to set the interrupt-on-completion
> bit, as it is wasteful to do so.
> - Delegate the responsibility of calling dma_wmb() from main driver code
> to set_rx_owner() callbacks (i.e. let callbacks to manage the low-level
> ordering/barrier rather than cluttering up the main driver code).
> v1:
> - https://patchwork.kernel.org/project/netdevbpf/patch/20240814092438.3129-1-ende.tan@starfivetech.com/
> ---
> drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 5 ++++-
> drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c | 5 +++--
> drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 1 +
> drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 1 +
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 --
> 5 files changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
> index 1c5802e0d7f4..95aea6ad485b 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
> @@ -186,10 +186,13 @@ static void dwmac4_set_tx_owner(struct dma_desc *p)
>
> static void dwmac4_set_rx_owner(struct dma_desc *p, int disable_rx_ic)
> {
> - p->des3 |= cpu_to_le32(RDES3_OWN | RDES3_BUFFER1_VALID_ADDR);
> + p->des3 |= cpu_to_le32(RDES3_BUFFER1_VALID_ADDR);
>
> if (!disable_rx_ic)
> p->des3 |= cpu_to_le32(RDES3_INT_ON_COMPLETION_EN);
RDES3_INT_ON_COMPLETION_EN was possibly written after RDES3_OWN
This looks like a bug fix to me, this should target the net tree.
> +
> + dma_wmb();
> + p->des3 |= cpu_to_le32(RDES3_OWN);
> }
>
> static int dwmac4_get_tx_ls(struct dma_desc *p)
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
> index fc82862a612c..d76ae833c840 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
> @@ -56,10 +56,11 @@ static void dwxgmac2_set_tx_owner(struct dma_desc *p)
>
> static void dwxgmac2_set_rx_owner(struct dma_desc *p, int disable_rx_ic)
> {
> - p->des3 |= cpu_to_le32(XGMAC_RDES3_OWN);
> -
> if (!disable_rx_ic)
> p->des3 |= cpu_to_le32(XGMAC_RDES3_IOC);
Same kind of bug here.
> +
> + dma_wmb();
> + p->des3 |= cpu_to_le32(XGMAC_RDES3_OWN);
> }
More information about the linux-arm-kernel
mailing list