[PATCH 2/3] arm64: dts: sprd: sc2731: fix bat-detect-gpios property

[Baolin Wang]

On 2024/8/15 18:13, Stanislav Jakubek wrote:
> According to DT bindings, the property is called bat-detect-gpios, not
> bat-detect-gpio. Update the property as such.
> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek at gmail.com>

Thanks.
Reviewed-by: Baolin Wang <baolin.wang at linux.alibaba.com>

> ---
>   arch/arm64/boot/dts/sprd/sc2731.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
> index 12136e68dada..c8b30c0479fd 100644
> --- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
> +++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
> @@ -97,7 +97,7 @@ pmic_adc: adc at 480 {
>   		fuel-gauge at a00 {
>   			compatible = "sprd,sc2731-fgu";
>   			reg = <0xa00>;
> -			bat-detect-gpio = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
> +			bat-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
>   			io-channels = <&pmic_adc 3>, <&pmic_adc 6>;
>   			io-channel-names = "bat-temp", "charge-vol";
>   			monitored-battery = <&bat>;