[PATCH 5/6] arm64: dts: imx8mp-phyboard-pollux: Add VCC_5V_SW regulator

[Teresa Remmet]

From: Yashwanth Varakala <y.varakala at phytec.de>

Add fixed  regulator VCC_5V_SW based on the phyBOARD-Pollux schematics
to reflect the connectivity on the phyBOARD-Pollux-i.MX8MP.

Signed-off-by: Yashwanth Varakala <y.varakala at phytec.de>
Signed-off-by: Teresa Remmet <t.remmet at phytec.de>
---
 arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 4cdb3b9fff08..62f1819bc1a4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -43,6 +43,15 @@ panel1_in: endpoint {
 		};
 	};
 
+	reg_vcc_5v_sw: regulator-vcc-5v-sw {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VCC_5V_SW";
+	};
+
 	reg_can1_stby: regulator-can1-stby {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";

-- 
2.25.1