[PATCH v5 1/4] dt-bindings: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint

[Rob Herring (Arm)]

On Tue, 13 Aug 2024 15:42:20 +0800, Richard Zhu wrote:
> Add reg-name: "dbi2", "atu" for i.MX8M PCIe Endpoint.
> 
> For i.MX8M PCIe EP, the dbi2 and atu addresses are pre-defined in the
> driver. This method is not good.
> 
> In commit b7d67c6130ee ("PCI: imx6: Add iMX95 Endpoint (EP) support"),
> Frank suggests to fetch the dbi2 and atu from DT directly. This commit is
> preparation to do that for i.MX8M PCIe EP.
> 
> These changes wouldn't break driver function. When "dbi2" and "atu"
> properties are present, i.MX PCIe driver would fetch the according base
> addresses from DT directly. If only two reg properties are provided, i.MX
> PCIe driver would fall back to the old method.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> Reviewed-by: Frank Li <Frank.Li at nxp.com>
> ---
>  .../devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml  | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)
> 


Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.

If a tag was not added on purpose, please state why and what changed.

Missing tags:

Reviewed-by: Rob Herring (Arm) <robh at kernel.org>