[PATCH net-next v2 7/7] net: stmmac: silence FPE kernel logs

[Furong Xu]

ethtool --show-mm can get real-time state of FPE.
Those kernel logs should keep quiet.

Signed-off-by: Furong Xu <0x1207 at gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
index b6114de34b31..733163c52f97 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
@@ -620,22 +620,22 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
 
 	if (value & TRSP) {
 		status |= FPE_EVENT_TRSP;
-		netdev_info(dev, "FPE: Respond mPacket is transmitted\n");
+		netdev_dbg(dev, "FPE: Respond mPacket is transmitted\n");
 	}
 
 	if (value & TVER) {
 		status |= FPE_EVENT_TVER;
-		netdev_info(dev, "FPE: Verify mPacket is transmitted\n");
+		netdev_dbg(dev, "FPE: Verify mPacket is transmitted\n");
 	}
 
 	if (value & RRSP) {
 		status |= FPE_EVENT_RRSP;
-		netdev_info(dev, "FPE: Respond mPacket is received\n");
+		netdev_dbg(dev, "FPE: Respond mPacket is received\n");
 	}
 
 	if (value & RVER) {
 		status |= FPE_EVENT_RVER;
-		netdev_info(dev, "FPE: Verify mPacket is received\n");
+		netdev_dbg(dev, "FPE: Verify mPacket is received\n");
 	}
 
 	return status;
-- 
2.34.1