[PATCH net-next v2 3/7] net: stmmac: refactor FPE verification processe
Furong Xu
0x1207 at gmail.com
Tue Aug 13 04:47:29 PDT 2024
Drop driver defined stmmac_fpe_state, and switch to common
ethtool_mm_verify_status for local TX verification status.
Local side and remote side verification processes are completely
independent. There is no reason at all to keep a local state and
a remote state.
Add a spinlock to avoid races between ISR and workqueue.
Signed-off-by: Furong Xu <0x1207 at gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 17 +-
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 150 ++++++++++--------
.../net/ethernet/stmicro/stmmac/stmmac_tc.c | 6 -
3 files changed, 87 insertions(+), 86 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 2c2181febb39..26ee1dbcccae 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -146,14 +146,6 @@ struct stmmac_channel {
u32 index;
};
-/* FPE link state */
-enum stmmac_fpe_state {
- FPE_STATE_OFF = 0,
- FPE_STATE_CAPABLE = 1,
- FPE_STATE_ENTERING_ON = 2,
- FPE_STATE_ON = 3,
-};
-
/* FPE link-partner hand-shaking mPacket type */
enum stmmac_mpacket_type {
MPACKET_VERIFY = 0,
@@ -166,10 +158,10 @@ enum stmmac_fpe_task_state_t {
};
struct stmmac_fpe_cfg {
- bool enable; /* FPE enable */
- bool hs_enable; /* FPE handshake enable */
- enum stmmac_fpe_state lp_fpe_state; /* Link Partner FPE state */
- enum stmmac_fpe_state lo_fpe_state; /* Local station FPE state */
+ bool pmac_enabled; /* see ethtool_mm_state */
+ bool verify_enabled; /* see ethtool_mm_state */
+ u32 verify_time; /* see ethtool_mm_state */
+ enum ethtool_mm_verify_status status;
u32 fpe_csr; /* MAC_FPE_CTRL_STS reg cache */
};
@@ -366,6 +358,7 @@ struct stmmac_priv {
struct workqueue_struct *wq;
struct work_struct service_task;
+ spinlock_t mm_lock;
struct stmmac_fpe_cfg fpe_cfg;
/* Workqueue for handling FPE hand-shaking */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3072ad33b105..a21268492475 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -969,16 +969,18 @@ static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
{
struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
- enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
- enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
- bool *hs_enable = &fpe_cfg->hs_enable;
+ unsigned long flags;
+
+ if (!fpe_cfg->pmac_enabled)
+ return;
- if (is_up && *hs_enable) {
+ if (is_up && fpe_cfg->verify_enabled) {
stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
MPACKET_VERIFY);
} else {
- *lo_state = FPE_STATE_OFF;
- *lp_state = FPE_STATE_OFF;
+ spin_lock_irqsave(&priv->mm_lock, flags);
+ fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_DISABLED;
+ spin_unlock_irqrestore(&priv->mm_lock, flags);
}
}
@@ -3533,9 +3535,16 @@ static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
stmmac_set_hw_vlan_mode(priv, priv->hw);
- if (priv->dma_cap.fpesel)
+ if (priv->dma_cap.fpesel) {
stmmac_fpe_start_wq(priv);
+ stmmac_fpe_configure(priv, priv->ioaddr,
+ &priv->fpe_cfg,
+ priv->plat->tx_queues_to_use,
+ priv->plat->rx_queues_to_use,
+ false);
+ }
+
return 0;
}
@@ -3978,6 +3987,11 @@ static int __stmmac_open(struct net_device *dev,
}
}
+ priv->fpe_cfg.pmac_enabled = false;
+ priv->fpe_cfg.verify_time = 128; /* ethtool_mm_state.max_verify_time */
+ priv->fpe_cfg.verify_enabled = false;
+ priv->fpe_cfg.status = ETHTOOL_MM_VERIFY_STATUS_DISABLED;
+
ret = stmmac_hw_setup(dev, true);
if (ret < 0) {
netdev_err(priv->dev, "%s: Hw setup failed\n", __func__);
@@ -4091,6 +4105,16 @@ static int stmmac_release(struct net_device *dev)
stmmac_release_ptp(priv);
+ stmmac_fpe_configure(priv, priv->ioaddr,
+ &priv->fpe_cfg,
+ priv->plat->tx_queues_to_use,
+ priv->plat->rx_queues_to_use,
+ false);
+
+ priv->fpe_cfg.pmac_enabled = false;
+ priv->fpe_cfg.verify_enabled = false;
+ priv->fpe_cfg.status = ETHTOOL_MM_VERIFY_STATUS_DISABLED;
+
pm_runtime_put(priv->device);
if (priv->dma_cap.fpesel)
@@ -5979,38 +6003,26 @@ static int stmmac_set_features(struct net_device *netdev,
static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
{
struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
- enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
- enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
- bool *hs_enable = &fpe_cfg->hs_enable;
- if (status == FPE_EVENT_UNKNOWN || !*hs_enable)
+ if (!fpe_cfg->pmac_enabled || status == FPE_EVENT_UNKNOWN)
return;
- /* If LP has sent verify mPacket, LP is FPE capable */
- if ((status & FPE_EVENT_RVER) == FPE_EVENT_RVER) {
- if (*lp_state < FPE_STATE_CAPABLE)
- *lp_state = FPE_STATE_CAPABLE;
+ /* LP has sent verify mPacket */
+ if ((status & FPE_EVENT_RVER) == FPE_EVENT_RVER)
+ stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
+ MPACKET_RESPONSE);
- /* If user has requested FPE enable, quickly response */
- if (*hs_enable)
- stmmac_fpe_send_mpacket(priv, priv->ioaddr,
- fpe_cfg,
- MPACKET_RESPONSE);
- }
+ spin_lock(&priv->mm_lock);
- /* If Local has sent verify mPacket, Local is FPE capable */
- if ((status & FPE_EVENT_TVER) == FPE_EVENT_TVER) {
- if (*lo_state < FPE_STATE_CAPABLE)
- *lo_state = FPE_STATE_CAPABLE;
- }
+ /* Local has sent verify mPacket */
+ if ((status & FPE_EVENT_TVER) == FPE_EVENT_TVER)
+ fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_VERIFYING;
- /* If LP has sent response mPacket, LP is entering FPE ON */
+ /* LP has sent response mPacket */
if ((status & FPE_EVENT_RRSP) == FPE_EVENT_RRSP)
- *lp_state = FPE_STATE_ENTERING_ON;
+ fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED;
- /* If Local has sent response mPacket, Local is entering FPE ON */
- if ((status & FPE_EVENT_TRSP) == FPE_EVENT_TRSP)
- *lo_state = FPE_STATE_ENTERING_ON;
+ spin_unlock(&priv->mm_lock);
if (!test_bit(__FPE_REMOVING, &priv->fpe_task_state) &&
!test_and_set_bit(__FPE_TASK_SCHED, &priv->fpe_task_state) &&
@@ -7372,50 +7384,51 @@ int stmmac_reinit_ringparam(struct net_device *dev, u32 rx_size, u32 tx_size)
return ret;
}
-#define SEND_VERIFY_MPAKCET_FMT "Send Verify mPacket lo_state=%d lp_state=%d\n"
-static void stmmac_fpe_lp_task(struct work_struct *work)
+static void stmmac_fpe_verify_task(struct work_struct *work)
{
struct stmmac_priv *priv = container_of(work, struct stmmac_priv,
fpe_task);
struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
- enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
- enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
- bool *hs_enable = &fpe_cfg->hs_enable;
- bool *enable = &fpe_cfg->enable;
- int retries = 20;
-
- while (retries-- > 0) {
- /* Bail out immediately if FPE handshake is OFF */
- if (*lo_state == FPE_STATE_OFF || !*hs_enable)
- break;
-
- if (*lo_state == FPE_STATE_ENTERING_ON &&
- *lp_state == FPE_STATE_ENTERING_ON) {
- stmmac_fpe_configure(priv, priv->ioaddr,
- fpe_cfg,
- priv->plat->tx_queues_to_use,
- priv->plat->rx_queues_to_use,
- *enable);
-
- netdev_info(priv->dev, "configured FPE\n");
+ int verify_limit = 3; /* defined by 802.3 */
+ unsigned long flags;
- *lo_state = FPE_STATE_ON;
- *lp_state = FPE_STATE_ON;
- netdev_info(priv->dev, "!!! BOTH FPE stations ON\n");
+ while (verify_limit > 0) {
+ if (fpe_cfg->status == ETHTOOL_MM_VERIFY_STATUS_DISABLED ||
+ fpe_cfg->status == ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED ||
+ !fpe_cfg->pmac_enabled || !fpe_cfg->verify_enabled)
break;
- }
- if ((*lo_state == FPE_STATE_CAPABLE ||
- *lo_state == FPE_STATE_ENTERING_ON) &&
- *lp_state != FPE_STATE_ON) {
- netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
- *lo_state, *lp_state);
- stmmac_fpe_send_mpacket(priv, priv->ioaddr,
- fpe_cfg,
+ if (fpe_cfg->status == ETHTOOL_MM_VERIFY_STATUS_VERIFYING)
+ stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
MPACKET_VERIFY);
- }
+
/* Sleep then retry */
- msleep(500);
+ msleep(fpe_cfg->verify_time);
+ verify_limit--;
+ }
+
+ if (fpe_cfg->status == ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED) {
+ spin_lock_irqsave(&priv->mm_lock, flags);
+
+ stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
+ priv->plat->tx_queues_to_use,
+ priv->plat->rx_queues_to_use,
+ true);
+
+ spin_unlock_irqrestore(&priv->mm_lock, flags);
+ }
+
+ if (verify_limit == 0) {
+ spin_lock_irqsave(&priv->mm_lock, flags);
+
+ fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_FAILED;
+ fpe_cfg->verify_enabled = false;
+ stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
+ priv->plat->tx_queues_to_use,
+ priv->plat->rx_queues_to_use,
+ false);
+
+ spin_unlock_irqrestore(&priv->mm_lock, flags);
}
clear_bit(__FPE_TASK_SCHED, &priv->fpe_task_state);
@@ -7535,8 +7548,8 @@ int stmmac_dvr_probe(struct device *device,
INIT_WORK(&priv->service_task, stmmac_service_task);
- /* Initialize Link Partner FPE workqueue */
- INIT_WORK(&priv->fpe_task, stmmac_fpe_lp_task);
+ /* Initialize FPE verify workqueue */
+ INIT_WORK(&priv->fpe_task, stmmac_fpe_verify_task);
/* Override with kernel parameters if supplied XXX CRS XXX
* this needs to have multiple instances
@@ -7701,6 +7714,7 @@ int stmmac_dvr_probe(struct device *device,
stmmac_napi_add(ndev);
mutex_init(&priv->lock);
+ spin_lock_init(&priv->mm_lock);
/* If a specific clk_csr value is passed from the platform
* this means that the CSR Clock Range selection cannot be
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index b0cc45331ff7..783829a6479c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -1063,11 +1063,6 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
return -EOPNOTSUPP;
}
- /* Actual FPE register configuration will be done after FPE handshake
- * is success.
- */
- priv->fpe_cfg.enable = fpe;
-
ret = stmmac_est_configure(priv, priv, priv->est,
priv->plat->clk_ptp_rate);
mutex_unlock(&priv->est_lock);
@@ -1094,7 +1089,6 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
mutex_unlock(&priv->est_lock);
}
- priv->fpe_cfg.enable = false;
stmmac_fpe_configure(priv, priv->ioaddr,
&priv->fpe_cfg,
priv->plat->tx_queues_to_use,
--
2.34.1
More information about the linux-arm-kernel
mailing list