[PATCH 05/17] arm64: dts: imx8mm-phygate: rename uart4_rs485_en to uart4-rs485-en-hog

[Frank Li]

Rename gpio uart4_rs485_en to uart4-rs485-en-hog to fix below warning:
arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtb:
  gpio at 30220000: 'uart4_rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
index f1f38b739ef76..78f4e8d5814da 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
@@ -18,7 +18,7 @@ &gpio3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio3_hog>;
 
-	uart4_rs485_en {
+	uart4-rs485-en-hog {
 		gpio-hog;
 		gpios = <20 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
index 1d8951e1a47e8..66288948bdd39 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
@@ -19,7 +19,7 @@ &gpio3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio3_hog>;
 
-	uart4_rs485_en {
+	uart4-rs485-en-hog {
 		gpio-hog;
 		gpios = <20 GPIO_ACTIVE_HIGH>;
 		output-high;

-- 
2.34.1