[PATCH v9 3/4] firmware: ti_sci: Introduce Power Management Ops

Dhruva Gole d-gole at ti.com
Sun Aug 11 22:47:17 PDT 2024


On Aug 09, 2024 at 15:53:46 +0200, Markus Schneider-Pargmann wrote:
> From: Dave Gerlach <d-gerlach at ti.com>
> 
> Introduce power management ops supported by the TISCI
> Low Power Mode API [1].
> 
> 1) TISCI_MSG_LPM_WAKE_REASON
> Get which wake up source woke the SoC from Low Power Mode.
> The wake up source IDs will be common for all K3 platforms.
> 
> 2) TISCI_MSG_LPM_SET_DEVICE_CONSTRAINT
> Set LPM constraint on behalf of a device. By setting a constraint, the
> device ensures that it will not be powered off or reset in the selected
> mode.
> 
> 3) TISCI_MSG_LPM_SET_LATENCY_CONSTRAINT
> Set LPM resume latency constraint. By setting a constraint, the host
> ensures that the resume time from selected mode will be less than the
> constraint value.
> 
> [1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/pm/lpm.html
> 
> Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
> [g-vlaev at ti.com: LPM_WAKE_REASON and IO_ISOLATION support]
> Signed-off-by: Georgi Vlaev <g-vlaev at ti.com>
> [a-kaur at ti.com: SET_DEVICE_CONSTRAINT support]
> Signed-off-by: Akashdeep Kaur <a-kaur at ti.com>
> [vibhore at ti.com: SET_LATENCY_CONSTRAINT support]
> Signed-off-by: Vibhore Vardhan <vibhore at ti.com>
> Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> ---
[...]
> diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
> index 8efe4d0e61fb..9dd40b6711d4 100644
> --- a/drivers/firmware/ti_sci.h
> +++ b/drivers/firmware/ti_sci.h
> @@ -38,7 +38,10 @@
>  
>  /* Low Power Mode Requests */
>  #define TI_SCI_MSG_PREPARE_SLEEP	0x0300
> +#define TI_SCI_MSG_LPM_WAKE_REASON	0x0306
>  #define TI_SCI_MSG_SET_IO_ISOLATION	0x0307
> +#define TI_SCI_MSG_LPM_SET_DEVICE_CONSTRAINT	0x0309
> +#define TI_SCI_MSG_LPM_SET_LATENCY_CONSTRAINT	0x030A
>  
>  /* Resource Management Requests */
>  #define TI_SCI_MSG_GET_RESOURCE_RANGE	0x1500
> @@ -610,6 +613,73 @@ struct ti_sci_msg_req_set_io_isolation {
>  	u8 state;
>  } __packed;
>  
> +/**
> + * struct ti_sci_msg_resp_lpm_wake_reason - Response for TI_SCI_MSG_LPM_WAKE_REASON.
> + *
> + * @hdr:		Generic header.
> + * @wake_source:	The wake up source that woke soc from LPM.
> + * @wake_timestamp:	Timestamp at which soc woke.
> + *
> + * Response to a generic message with message type TI_SCI_MSG_LPM_WAKE_REASON,
> + * used to query the wake up source from low power mode.
> + */
> +struct ti_sci_msg_resp_lpm_wake_reason {
> +	struct ti_sci_msg_hdr hdr;
> +	u32 wake_source;
> +	u64 wake_timestamp;
> +} __packed;
> +

It looks like we forgot to update the parameters in this API.
See [1]:

struct tisci_msg_lpm_wake_reason_req

We're missing here the wake_pin, mode and 2 rsvd fields as well.

[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/pm/lpm.html#tisci-msg-lpm-wake-reason

-- 
Best regards,
Dhruva Gole <d-gole at ti.com>



More information about the linux-arm-kernel mailing list