[PATCH] arm64: dts: mt8183-kukui: Add trip points to each thermal zone

[Hsin-Te Yuan]

Add trip points to the tboard1 and tboard2 thermal zones to ensure they
are registered successfully.

Signed-off-by: Hsin-Te Yuan <yuanhsinte at chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 6345e969efae..1593ea14f81f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -978,12 +978,38 @@ tboard1 {
 		polling-delay = <1000>; /* milliseconds */
 		polling-delay-passive = <0>; /* milliseconds */
 		thermal-sensors = <&tboard_thermistor1>;
+		trips {
+			tboard1_alert: trip-alert {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			tboard1_crit: trip-crit {
+				temperature = <100000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
 	};
 
 	tboard2 {
 		polling-delay = <1000>; /* milliseconds */
 		polling-delay-passive = <0>; /* milliseconds */
 		thermal-sensors = <&tboard_thermistor2>;
+		trips {
+			tboard2_alert: trip-alert {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			tboard2_crit: trip-crit {
+				temperature = <100000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
 	};
 };
 

---
base-commit: 21b136cc63d2a9ddd60d4699552b69c214b32964
change-id: 20240801-kukui_trip-6625c0a54c50

Best regards,
-- 
Hsin-Te Yuan <yuanhsinte at chromium.org>