[PATCH v2 2/2] tty: serial: samsung_tty: cast the interrupt's void *id just once

[André Draszik]

On Thu, 2024-08-08 at 09:31 +0200, Jiri Slaby wrote:
> On 07. 08. 24, 13:58, André Draszik wrote:
> > The interrupt handler routines and helpers are casting the 'void *'
> > pointer to 'struct exynos_uart_port *' all over the place.
> > 
> > There is no need for that, we can do the casting once and keep passing
> > the 'struct exynos_uart_port *', simplifying the code and saving a few
> > lines of code.
> > 
> > No functional changes.
> ...
> > @@ -944,17 +939,17 @@ static irqreturn_t s3c24xx_serial_tx_irq(void *id)
> >   /* interrupt handler for s3c64xx and later SoC's.*/
> >   static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
> >   {
> > -	const struct s3c24xx_uart_port *ourport = id;
> > -	const struct uart_port *port = &ourport->port;
> > +	struct s3c24xx_uart_port *ourport = id;
> > +	struct uart_port *port = &ourport->port;
> >   	u32 pend = rd_regl(port, S3C64XX_UINTP);
> >   	irqreturn_t ret = IRQ_HANDLED;
> >   
> >   	if (pend & S3C64XX_UINTM_RXD_MSK) {
> > -		ret = s3c24xx_serial_rx_irq(id);
> > +		ret = s3c24xx_serial_rx_irq(ourport);
> >   		wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK);
> >   	}
> >   	if (pend & S3C64XX_UINTM_TXD_MSK) {
> > -		ret = s3c24xx_serial_tx_irq(id);
> > +		ret = s3c24xx_serial_tx_irq(ourport);
> >   		wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK);
> >   	}
> >   	return ret;
> > @@ -963,19 +958,19 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
> >   /* interrupt handler for Apple SoC's.*/
> >   static irqreturn_t apple_serial_handle_irq(int irq, void *id)
> >   {
> > -	const struct s3c24xx_uart_port *ourport = id;
> > -	const struct uart_port *port = &ourport->port;
> > +	struct s3c24xx_uart_port *ourport = id;
> > +	struct uart_port *port = &ourport->port;
> 
> No need to remove const from port here and above, right? (Only from 
> ourport.)

Jiri, you're right of course.

Thanks,
A.