[PATCH v2 0/3] Add support for Kontron OSM-S i.MX8MP SoM and carrier boards

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf at kontron.de>

Patch 1: board DT bindings
Patch 2: OSM-S i.MX8MP SoM and BL carrier board devicetrees
Patch 3: i.MX8MP SMARC module and eval carrier board devicetrees

Changes for v2:

DT bindings (patch1):
* Add tags from Krzysztof and Conor (thanks!)

SMARC DTs (patch 3):
* Fix GPIO labels
* Add support for TPM chip on SMARC module
* Disable PWM in favor of GPIO5 on SMARC carrier
* Enable LCDIF node to make HDMI work
* Add support for GPIO expanders on SMARC carrier
* Remove SPI flash as its removable and should be in an overlay
* Add CAN regulators to fix transceiver enable

Frieder Schrempf (3):
  dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards
  arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier
    board
  arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval
    carrier

 .../devicetree/bindings/arm/fsl.yaml          |  13 +
 arch/arm64/boot/dts/freescale/Makefile        |   6 +
 .../dts/freescale/imx8mp-kontron-bl-osm-s.dts | 307 ++++++
 .../boot/dts/freescale/imx8mp-kontron-dl.dtso | 112 +++
 .../dts/freescale/imx8mp-kontron-osm-s.dtsi   | 908 ++++++++++++++++++
 .../imx8mp-kontron-smarc-eval-carrier.dts     | 258 +++++
 .../dts/freescale/imx8mp-kontron-smarc.dtsi   | 281 ++++++
 7 files changed, 1885 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi

-- 
2.45.2