[PATCH v1] arm: dts: st: Add MECIO1 and MECT1S board variants

[Oleksij Rempel]

On Tue, Aug 06, 2024 at 02:39:31PM +0200, Krzysztof Kozlowski wrote:
> On 06/08/2024 14:03, Oleksij Rempel wrote:
> > From: David Jander <david at protonic.nl>
> > 
> > Introduce device tree support for the MECIO1 and MECT1S board variants.
> > MECIO1 is an I/O and motor control board used in blood sample analysis
> > machines. MECT1S is a 1000Base-T1 switch for internal machine networks
> > of blood sample analysis machines.
> > 
> > Signed-off-by: David Jander <david at protonic.nl>
> > Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
> > ---
> >  .../devicetree/bindings/arm/stm32/stm32.yaml  |   8 +
> >  arch/arm/boot/dts/st/Makefile                 |   3 +
> >  arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts |  48 ++
> >  arch/arm/boot/dts/st/stm32mp151c-mect1s.dts   | 297 ++++++++++
> >  arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts |  48 ++
> >  .../arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi | 533 ++++++++++++++++++
> >  6 files changed, 937 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts
> >  create mode 100644 arch/arm/boot/dts/st/stm32mp151c-mect1s.dts
> >  create mode 100644 arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts
> >  create mode 100644 arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi
> > 
> > diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
> > index 58099949e8f3a..703d4b574398d 100644
> > --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
> > +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
> 
> Please run scripts/checkpatch.pl and fix reported warnings. Then please
> run `scripts/checkpatch.pl --strict` and (probably) fix more warnings.

Ack, I see. stm32.yaml should be in separate patch.

> Some warnings can be ignored, especially from --strict run, but the code
> here looks like it needs a fix. Feel free to get in touch if the warning
> is not clear.

What should be done with "ethernet-phy-id2000.a284" appears
un-documente warnings? Should it be handled by
Documentation/devicetree/bindings/net/ethernet-phy.yaml?

Best regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |