[PATCH v3 1/7] dt-bindings: mfd: add binding for qnap,ts433-mcu devices

[Rob Herring]

On Wed, Jul 31, 2024 at 11:24:24PM +0200, Heiko Stuebner wrote:
> These MCUs can be found in network attached storage devices made by QNAP.
> They are connected to a serial port of the host device and provide
> functionality like LEDs, power-control and temperature monitoring.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> ---
>  .../bindings/mfd/qnap,ts433-mcu.yaml          | 43 +++++++++++++++++++
>  1 file changed, 43 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml b/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml
> new file mode 100644
> index 0000000000000..5ae19d8faedbd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml
> @@ -0,0 +1,43 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/qnap,ts433-mcu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: QNAP NAS on-board Microcontroller
> +
> +maintainers:
> +  - Heiko Stuebner <heiko at sntech.de>
> +
> +description:
> +  QNAP embeds a microcontroller on their NAS devices adding system feature
> +  as PWM Fan control, additional LEDs, power button status and more.

Doesn't really look like the binding is complete.

> +
> +properties:
> +  compatible:
> +    enum:
> +      - qnap,ts433-mcu
> +
> +  "#cooling-cells":
> +    const: 2
> +
> +  cooling-levels:
> +    description: PWM duty cycle values corresponding to thermal cooling states.
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    items:
> +      maximum: 255

These are fan properties and should be in a "fan" node referencing 
hwmon/fan-common.yaml.

Rob