[PATCH v2 0/4] Cleanup Spreadtum/Unisoc ARM64 DT
Stanislav Jakubek
stano.jakubek at gmail.com
Mon Aug 5 09:29:46 PDT 2024
Hi all,
On Mon, Aug 05, 2024 at 09:00:20AM -0600, Rob Herring (Arm) wrote:
>
[snip]
>
> New warnings running 'make CHECK_DTBS=y sprd/sc9836-openphone.dtb sprd/sp9860g-1h10.dtb' for cover.1722842066.git.stano.jakubek at gmail.com:
>
> arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: fuel-gauge at a00: 'battery-detect-gpios' is a required property
> from schema $id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#
This is a straigtforward fix, the sc2731.dtsi has ...-gpio instead of ...-gpios
I can fix this in another patch, I'd like to get this series merged first.
> arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: fuel-gauge at a00: 'sprd,calib-resistance-micro-ohms' is a required property
> from schema $id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#
SPRD folks will have to chime in here as I do not have the board or any
other source of information about it, so I cannot add this property.
> arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: fuel-gauge at a00: 'bat-detect-gpio', 'interrupt-parent', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#
Looking at the driver, it seems to me that the interrupts are required, and
thus should be added to the bindings. I can send a patch.
Looking at the sc2731-fgu dtsi again, it seems like there's some further
fixes/improvements that could be made (disable by default, move the
monitored-battery to board DTS, etc.).
Either way, this series should be good to go.
Thanks,
Stanislav
More information about the linux-arm-kernel
mailing list