[PATCH] arm64: dts: freescale: imx8mp-phyboard-pollux: Add and enable TPM

[Fabio Estevam]

Hi Benjamin,

On Mon, Aug 5, 2024 at 10:33 AM Benjamin Hahn <B.Hahn at phytec.de> wrote:

> +/* TPM */
> +&ecspi1 {
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
> +       num-cs = <1>;

num-cs is not needed.

The number of chip selects can be retrieved from cs-gpios.

> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
> +       status = "okay";
> +
> +       tpm: tpm_tis at 0 {

Node names should be generic.

Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml suggests 'tpm', so:

tpm: tmp at 0 {

>  &iomuxc {
> +       pinctrl_ecspi1: ecspi1grp {
> +               fsl,pins = <
> +                       MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO   0x80
> +                       MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI   0x80
> +                       MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK   0x80
> +               >;
> +       };
> +
> +       pinctrl_ecspi1_cs: ecspi1csgrp {
> +               fsl,pins = <
> +                       MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09     0x00

Maybe simpler to put MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 as part of
pinctrl_ecspi1.