[PATCH] ARM: dts: imx6sx-udoo-neo: Properly configure ENET_REF

[Shawn Guo]

On Fri, Jun 28, 2024 at 11:18:27PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam at denx.de>
> 
> By default, the ENET_REF is configured at 125MHz on i.MX6SX, which works
> well for boards that operate in RGMII mode.
> 
> The imx6sx-udoo-neo has a KSZ8091 Ethernet PHY that is connected via
> RMII interface, so a 50MHz ENET_REF clock is expected.
> 
> Describe the IMX6SX_CLK_ENET_REF accordingly.
> 
> Signed-off-by: Fabio Estevam <festevam at denx.de>

Applied, thanks!