[PATCH v2 9/9] clk: clocking-wizard: move dynamic reconfig setup behind flag

[Harry Austen]

Xilinx clocking wizard IP core's dynamic reconfiguration support is
optionally enabled at build time. Use the new boolean devicetree
property to indicate whether the hardware supports this feature or not.

Signed-off-by: Harry Austen <hpausten at protonmail.com>
---
v1 -> v2: No functional change

 drivers/clk/xilinx/clk-xlnx-clock-wizard.c | 73 +++++++++++-----------
 1 file changed, 38 insertions(+), 35 deletions(-)

diff --git a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
index 557e11017faf9..fb655d53b2029 100644
--- a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
+++ b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
@@ -1192,20 +1192,6 @@ static int clk_wzrd_probe(struct platform_device *pdev)
 	if (IS_ERR(clk_wzrd->base))
 		return PTR_ERR(clk_wzrd->base);
 
-	ret = of_property_read_u32(np, "xlnx,speed-grade", &clk_wzrd->speed_grade);
-	if (!ret) {
-		if (clk_wzrd->speed_grade < 1 || clk_wzrd->speed_grade > 3) {
-			dev_warn(&pdev->dev, "invalid speed grade '%d'\n",
-				 clk_wzrd->speed_grade);
-			clk_wzrd->speed_grade = 0;
-		}
-	}
-
-	clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1");
-	if (IS_ERR(clk_wzrd->clk_in1))
-		return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->clk_in1),
-				     "clk_in1 not found\n");
-
 	clk_wzrd->axi_clk = devm_clk_get_enabled(&pdev->dev, "s_axi_aclk");
 	if (IS_ERR(clk_wzrd->axi_clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->axi_clk),
@@ -1220,31 +1206,48 @@ static int clk_wzrd_probe(struct platform_device *pdev)
 	if (ret)
 		return dev_err_probe(&pdev->dev, ret, "failed to setup monitor\n");
 
-	ret = clk_wzrd_register_output_clocks(&pdev->dev, nr_outputs);
-	if (ret)
-		return ret;
-
-	clk_wzrd->clk_data.num = nr_outputs;
-	ret = devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_onecell_get, &clk_wzrd->clk_data);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to register clock provider\n");
-		return ret;
-	}
+	if (of_property_read_bool(np, "xlnx,dynamic-reconfig")) {
+		ret = of_property_read_u32(np, "xlnx,speed-grade", &clk_wzrd->speed_grade);
+		if (!ret) {
+			if (clk_wzrd->speed_grade < 1 || clk_wzrd->speed_grade > 3) {
+				dev_warn(&pdev->dev, "invalid speed grade '%d'\n",
+					 clk_wzrd->speed_grade);
+				clk_wzrd->speed_grade = 0;
+			}
+		}
 
-	if (clk_wzrd->speed_grade) {
-		clk_wzrd->nb.notifier_call = clk_wzrd_clk_notifier;
+		clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1");
+		if (IS_ERR(clk_wzrd->clk_in1))
+			return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->clk_in1),
+					     "clk_in1 not found\n");
 
-		ret = devm_clk_notifier_register(&pdev->dev, clk_wzrd->clk_in1,
-						 &clk_wzrd->nb);
+		ret = clk_wzrd_register_output_clocks(&pdev->dev, nr_outputs);
 		if (ret)
-			dev_warn(&pdev->dev,
-				 "unable to register clock notifier\n");
+			return ret;
+
+		clk_wzrd->clk_data.num = nr_outputs;
+		ret = devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_onecell_get,
+						  &clk_wzrd->clk_data);
+		if (ret) {
+			dev_err(&pdev->dev, "unable to register clock provider\n");
+			return ret;
+		}
 
-		ret = devm_clk_notifier_register(&pdev->dev, clk_wzrd->axi_clk,
-						 &clk_wzrd->nb);
-		if (ret)
-			dev_warn(&pdev->dev,
-				 "unable to register clock notifier\n");
+		if (clk_wzrd->speed_grade) {
+			clk_wzrd->nb.notifier_call = clk_wzrd_clk_notifier;
+
+			ret = devm_clk_notifier_register(&pdev->dev, clk_wzrd->clk_in1,
+							 &clk_wzrd->nb);
+			if (ret)
+				dev_warn(&pdev->dev,
+					 "unable to register clock notifier\n");
+
+			ret = devm_clk_notifier_register(&pdev->dev, clk_wzrd->axi_clk,
+							 &clk_wzrd->nb);
+			if (ret)
+				dev_warn(&pdev->dev,
+					 "unable to register clock notifier\n");
+		}
 	}
 
 	return 0;
-- 
2.46.0