[PATCH v2 0/2] arm64: dts: renesas: Add CAN-FD support for R-Car V4M and Gray Hawk Single

Geert Uytterhoeven geert+renesas at glider.be
Thu Aug 1 06:54:34 PDT 2024


	Hi all,

This patch series adds support for CAN-FD on the R-Car V4M SoC and the
Gray Hawk Single development board.

The CAN-FD module on R-Car V4M is very similar to the one on R-Car V4H,
but differs in some hardware parameters, as reflected by the Parameter
Status Information part of the Global IP Version Register.  However,
none of this parameterization should have any impact on the driver, as
the driver does not access any register that is impacted by the
parameterization (except for the number of channels).

Just like on R-Car V4H and on the White Hawk development board, channels
0 and 1 work fine, while channel 2 does not seem to work at all, and
channel 3 works for transmit only.  Hence this patch keeps channels 2
and 3 disabled.

Changes compared to v1[1]:
  - Spun off clock and DT binding patches,
  - Add missing pinctrl-names,
  - Correct TJR1443AT Enable GPIO,
  - Reword now channels 0 and 1 work.

I plan to queue this is renesas-devel for v6.12.

Thanks for your comments!

[1] https://lore.kernel.org/cover.1715956819.git.geert+renesas@glider.be

Duy Nguyen (1):
  arm64: dts: renesas: r8a779h0: Add CAN-FD node

Geert Uytterhoeven (1):
  arm64: dts: renesas: gray-hawk-single: Add CAN-FD support

 .../dts/renesas/r8a779h0-gray-hawk-single.dts | 41 +++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a779h0.dtsi     | 41 +++++++++++++++++++
 2 files changed, 82 insertions(+)

-- 
2.34.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds



More information about the linux-arm-kernel mailing list