[PATCH v4] drm/mediatek: dsi: Add dsi per-frame lp code for mt8188
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Thu Aug 1 01:47:24 PDT 2024
Il 01/08/24 10:11, Shuijing Li ha scritto:
> Adding the per-frame lp function of mt8188, which can keep HFP in HS and
> reduce the time required for each line to enter and exit low power.
> Per Frame LP:
> |<----------One Active Frame-------->|
> --______________________________________----___________________
> ^HSA+HBP^^RGB^^HFP^^HSA+HBP^^RGB^^HFP^ ^HSA+HBP^^RGB^^HFP^
>
> Per Line LP:
> |<---------------One Active Frame----------->|
> --______________--______________--______________----______________
> ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^
>
> Signed-off-by: Shuijing Li <shuijing.li at mediatek.com>
> ---
> Changes in v4:
> Drop the code related to bllp_en and bllp_wc, adjust ps_wc to dsi->vm.hactive *
> dsi_buf_bpp.
> Changes in v3:
> Use function in bitfield.h and get value from phy timing, per suggestion
> from previous thread:
> https://patchwork.kernel.org/project/linux-mediatek/patch/20240424091639.22759-1-shuijing.li@mediatek.com/
> Changes in v2:
> Use bitfield macros and add new function for per prame lp and improve
> the format, per suggestion from previous thread:
> https://patchwork.kernel.org/project/linux-mediatek/patch/20240314094238.3315-1-shuijing.li@mediatek.com/
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 210 ++++++++++++++++++++++-------
> 1 file changed, 163 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index b6e3c011a12d..4bda8fa17c3d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -88,12 +88,16 @@
> #define DSI_HSA_WC 0x50
> #define DSI_HBP_WC 0x54
> #define DSI_HFP_WC 0x58
> +#define HFP_HS_EN 31
#define HFP_HS_VB_PS_WC GENMASK(30, 16)
#define HFP_HS_EN BIT(31)
> +#define HFP_HS_VB_PS_WC_SHIFT 16
...you don't need this definition
>
> #define DSI_CMDQ_SIZE 0x60
> #define CMDQ_SIZE 0x3f
> #define CMDQ_SIZE_SEL BIT(15)
>
> #define DSI_HSTX_CKL_WC 0x64
> +#define HSTX_CKL_WC GENMASK(15, 2)
> +#define HSTX_CKL_WC_SHIFT 2
This one is already defined in your GENMASK(...), and you should avoid having to
define that at all. Check below for a solution.
>
> #define DSI_RX_DATA0 0x74
> #define DSI_RX_DATA1 0x78
> @@ -187,6 +191,7 @@ struct mtk_dsi_driver_data {
> bool has_shadow_ctl;
> bool has_size_ctl;
> bool cmdq_long_packet_ctl;
> + bool support_per_frame_lp;
> };
>
> struct mtk_dsi {
> @@ -426,6 +431,112 @@ static void mtk_dsi_ps_control(struct mtk_dsi *dsi, bool config_vact)
> writel(ps_val, dsi->regs + DSI_PSCTRL);
> }
>
> +static void mtk_dsi_config_vdo_timing_per_frame_lp(struct mtk_dsi *dsi)
> +{
> + u32 horizontal_sync_active_byte;
> + u32 horizontal_backporch_byte;
> + u32 horizontal_frontporch_byte;
> + u32 dsi_tmp_buf_bpp;
> + unsigned int lpx, da_hs_exit, da_hs_prep, da_hs_trail;
> + unsigned int da_hs_zero, ps_wc, hs_vb_ps_wc;
> + u32 v_active_roundup, hstx_cklp_wc;
> + u32 hstx_cklp_wc_max, hstx_cklp_wc_min;
> + struct videomode *vm = &dsi->vm;
> +
> + if (dsi->format == MIPI_DSI_FMT_RGB565)
> + dsi_tmp_buf_bpp = 2;
> + else
> + dsi_tmp_buf_bpp = 3;
> +
> + da_hs_trail = dsi->phy_timing.da_hs_trail;
> + ps_wc = dsi->vm.hactive * dsi_tmp_buf_bpp;
> +
> + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
> + horizontal_sync_active_byte =
> + vm->hsync_len * dsi_tmp_buf_bpp - 10;
> + horizontal_backporch_byte =
> + vm->hback_porch * dsi_tmp_buf_bpp - 10;
> + horizontal_frontporch_byte =
> + vm->hfront_porch * dsi_tmp_buf_bpp - 12;
> +
> + v_active_roundup = (32 + horizontal_sync_active_byte +
> + horizontal_backporch_byte + ps_wc +
> + horizontal_frontporch_byte) % dsi->lanes;
> + if (v_active_roundup)
> + horizontal_backporch_byte = horizontal_backporch_byte +
> + dsi->lanes - v_active_roundup;
> + hstx_cklp_wc_min = (DIV_ROUND_UP((12 + 2 + 4 +
> + horizontal_sync_active_byte), dsi->lanes) + da_hs_trail + 1)
> + * dsi->lanes / 6 - 1;
> + hstx_cklp_wc_max = (DIV_ROUND_UP((20 + 6 + 4 +
> + horizontal_sync_active_byte + horizontal_backporch_byte +
> + ps_wc), dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1;
> + } else {
> + horizontal_sync_active_byte = vm->hsync_len * dsi_tmp_buf_bpp - 4;
> +
> + horizontal_backporch_byte = (vm->hback_porch + vm->hsync_len) *
> + dsi_tmp_buf_bpp - 10;
> + hstx_cklp_wc_min = (DIV_ROUND_UP(4, dsi->lanes) + da_hs_trail + 1)
> + * dsi->lanes / 6 - 1;
> +
> + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
> + horizontal_frontporch_byte = (vm->hfront_porch *
> + dsi_tmp_buf_bpp - 18);
> +
> + v_active_roundup = (28 + horizontal_backporch_byte + ps_wc +
> + horizontal_frontporch_byte) % dsi->lanes;
> + if (v_active_roundup)
> + horizontal_backporch_byte = horizontal_backporch_byte +
> + dsi->lanes - v_active_roundup;
> +
> + hstx_cklp_wc_max = (DIV_ROUND_UP((12 + 4 + 4 +
> + horizontal_backporch_byte + ps_wc),
> + dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1;
> + } else {
> + horizontal_frontporch_byte = (vm->hfront_porch *
> + dsi_tmp_buf_bpp - 12);
> +
> + v_active_roundup = (22 + horizontal_backporch_byte + ps_wc +
> + horizontal_frontporch_byte) % dsi->lanes;
> + if (v_active_roundup)
> + horizontal_backporch_byte = horizontal_backporch_byte +
> + dsi->lanes - v_active_roundup;
> +
> + hstx_cklp_wc_max = (DIV_ROUND_UP((12 + 4 + 4 +
> + horizontal_backporch_byte + ps_wc),
> + dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1;
> + }
> + }
> + hstx_cklp_wc = FIELD_GET(HSTX_CKL_WC, readl(dsi->regs + DSI_HSTX_CKL_WC));
> +
Sorry, this snippet is ugly.
> + if (hstx_cklp_wc <= hstx_cklp_wc_min ||
> + hstx_cklp_wc >= hstx_cklp_wc_max) {
> + hstx_cklp_wc = ((hstx_cklp_wc_min + hstx_cklp_wc_max) / 2) << HSTX_CKL_WC_SHIFT;
> + writel(hstx_cklp_wc, dsi->regs + DSI_HSTX_CKL_WC);
> + }
> + hstx_cklp_wc = hstx_cklp_wc >> HSTX_CKL_WC_SHIFT;
> + if (hstx_cklp_wc <= hstx_cklp_wc_min ||
> + hstx_cklp_wc >= hstx_cklp_wc_max) {
> + DRM_WARN("Wrong setting of hstx_ckl_wc\n");
> + }
.........
I can propose the following:
if (hstx_cklp_wc <= hstx_cklp_wc_min || hstx_cklp_wc >= hstx_cklp_wc_max) {
hstx_cklp_wc = ((hstx_cklp_wc_min + hstx_cklp_wc_max) / 2);
/* Check if the new setting is valid */
if (hstx_cklp_wc <= hstx_cklp_wc_min || hstx_cklp_wc >= hstx_cklp_wc_max)
DRM_WARN("Wrong setting of hstx_ckl_wc\n");
hstx_cklp_wc = FIELD_PREP(DSI_HSTX_CKL_WC, hstx_cklp_wc);
writel(hstx_cklp_wc, dsi->regs + DSI_HSTX_CKL_WC);
}
.... and please remove the definition of HSTX_CKL_WC_SHIFT, as that is unused now.
> +
> + lpx = dsi->phy_timing.lpx;
> + da_hs_exit = dsi->phy_timing.da_hs_exit;
> + da_hs_prep = dsi->phy_timing.da_hs_prepare;
> + da_hs_zero = dsi->phy_timing.da_hs_zero;
> +
> + hs_vb_ps_wc = ps_wc -
> + (lpx + da_hs_exit + da_hs_prep + da_hs_zero + 2)
> + * dsi->lanes;
> + horizontal_frontporch_byte = (1 << HFP_HS_EN)
> + | (hs_vb_ps_wc << HFP_HS_VB_PS_WC_SHIFT)
> + | (horizontal_frontporch_byte);
horizontal_frontporch_byte = FIELD_PREP(HFP_HS_EN, 1) |
FIELD_PREP(HFP_HS_VB_PS_WC, hs_vb_ps_wc) |
horizontal_frontporch_byte;
> +
> + writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC);
> + writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC);
> + writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC);
> +}
> +
> static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
> {
> u32 horizontal_sync_active_byte;
> @@ -449,57 +560,61 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
> writel(vm->vfront_porch, dsi->regs + DSI_VFP_NL);
> writel(vm->vactive, dsi->regs + DSI_VACT_NL);
>
> - if (dsi->driver_data->has_size_ctl)
> - writel(FIELD_PREP(DSI_HEIGHT, vm->vactive) |
> - FIELD_PREP(DSI_WIDTH, vm->hactive),
> - dsi->regs + DSI_SIZE_CON);
> -
> - horizontal_sync_active_byte = (vm->hsync_len * dsi_tmp_buf_bpp - 10);
> -
> - if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
> - horizontal_backporch_byte = vm->hback_porch * dsi_tmp_buf_bpp - 10;
> - else
> - horizontal_backporch_byte = (vm->hback_porch + vm->hsync_len) *
> - dsi_tmp_buf_bpp - 10;
> -
> - data_phy_cycles = timing->lpx + timing->da_hs_prepare +
> - timing->da_hs_zero + timing->da_hs_exit + 3;
> -
> - delta = dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST ? 18 : 12;
> - delta += dsi->mode_flags & MIPI_DSI_MODE_NO_EOT_PACKET ? 0 : 2;
> + if (dsi->driver_data->support_per_frame_lp)
There's a code style issue. If you need braces for the else, you need to
add braces everywhere:
if (dsi->driver_data->support_per_frame_lp) {
mtk_dsi_config_vdo_timing_per_frame_lp(dsi);
} else {
......
Regards,
Angelo
More information about the linux-arm-kernel
mailing list