[PATCH] arm64: dts: Add/fix /memory node unit-addresses

[Florian Fainelli]

On 4/30/24 12:18, Rob Herring (Arm) wrote:
> '/memory' nodes always have a 'reg' property, and therefore should have
> a unit-address with just plain hex (i.e. no commas). Fix all the arm64
> '/memory' nodes.
> 
> It's possible that some bootloader depends on /memory (arm32 ATAG to DT
> code does for example). If so, the memory node should be commented with
> that requirement.
> 
> Signed-off-by: Rob Herring (Arm) <robh at kernel.org>
> ---
> SoC maintainers, please take this directly.
> 
> arm32 is much worse, but the platforms using ATAG to DT code can't be
> changed and I don't know which ones those are.
> 
>   arch/arm64/boot/dts/actions/s700-cubieboard7.dts       | 2 +-
>   arch/arm64/boot/dts/apm/apm-merlin.dts                 | 2 +-
>   arch/arm64/boot/dts/apm/apm-mustang.dts                | 2 +-
>   arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts    | 2 +-
>   arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts    | 2 +-

For the above two:

Reviewed-by: Florian Fainelli <florian.fainelli at broadcom.com>
-- 
Florian