[PATCH v4] arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances
Beleswar Padhi
b-padhi at ti.com
Tue Apr 30 06:15:12 PDT 2024
CAN instance 0 in the mcu domain is brought on the J721E-SK board
through header J1. Thus, add its respective transceiver 1 dt node to add
support for this CAN instance.
CAN instances 0, 5 and 9 in the main domain are brought on the J721E-SK
board through headers J5, J6 and J2 respectively. Thus, add their
respective transceivers 2, 3 and 4 dt nodes to add support for these CAN
instances.
Signed-off-by: Beleswar Padhi <b-padhi at ti.com>
---
Test logs: https://gist.github.com/3V3RYONE/2144fa883bf3a390981d25572971fcf3
v4: Changelog:
1) Made transceiver ID and can-phy ID in sync for all applicable nodes
Link to v3:
https://lore.kernel.org/all/20240412112025.201639-1-b-padhi@ti.com/
v3: Changelog:
1) Updated board name in capital letters in commit message description
2) Updated test logs to include communication between all applicable CAN
instances
Link to v2:
https://lore.kernel.org/linux-arm-kernel/20240325103405.182692-1-b-padhi@ti.com/
v2: Changelog:
1) Re-ordered status = "okay" property to the end of all applicable dt
nodes following kernel documentation
Link to v1:
https://lore.kernel.org/linux-arm-kernel/20240315124728.490331-1-b-padhi@ti.com/
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 116 +++++++++++++++++++++++++
1 file changed, 116 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 0c4575ad8d7c..02e6c49b7090 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -210,6 +210,42 @@ vdd_sd_dv_alt: gpio-regulator-tps659411 {
<3300000 0x1>;
};
+ transceiver1: can-phy1 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+ standby-gpios = <&wkup_gpio0 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver2: can-phy2 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan0_gpio_pins_default>;
+ standby-gpios = <&main_gpio0 65 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver3: can-phy3 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan5_gpio_pins_default>;
+ standby-gpios = <&main_gpio0 66 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver4: can-phy4 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan9_gpio_pins_default>;
+ standby-gpios = <&main_gpio0 67 GPIO_ACTIVE_HIGH>;
+ };
+
dp_pwr_3v3: fixedregulator-dp-prw {
compatible = "regulator-fixed";
regulator-name = "dp-pwr";
@@ -367,6 +403,45 @@ J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */
>;
};
+ main_mcan0_pins_default: main-mcan0-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */
+ J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */
+ >;
+ };
+
+ main_mcan0_gpio_pins_default: main-mcan0-gpio-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x108, PIN_INPUT, 7) /* (AD27) PRG0_PRU1_GPO2.GPIO0_65 */
+ >;
+ };
+
+ main_mcan5_pins_default: main-mcan5-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x050, PIN_INPUT, 6) /* (AE21) PRG1_PRU0_GPO18.MCAN5_RX */
+ J721E_IOPAD(0x04c, PIN_OUTPUT, 6) /* (AJ21) PRG1_PRU0_GPO17.MCAN5_TX */
+ >;
+ };
+
+ main_mcan5_gpio_pins_default: main-mcan5-gpio-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x10c, PIN_INPUT, 7) /* (AC25) PRG0_PRU1_GPO3.GPIO0_66 */
+ >;
+ };
+
+ main_mcan9_pins_default: main-mcan9-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x0d0, PIN_INPUT, 6) /* (AC27) PRG0_PRU0_GPO8.MCAN9_RX */
+ J721E_IOPAD(0x0cc, PIN_OUTPUT, 6) /* (AC28) PRG0_PRU0_GPO7.MCAN9_TX */
+ >;
+ };
+
+ main_mcan9_gpio_pins_default: main-mcan9-gpio-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x110, PIN_INPUT, 7) /* (AD29) PRG0_PRU1_GPO4.GPIO0_67 */
+ >;
+ };
+
dp0_pins_default: dp0-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
@@ -555,6 +630,19 @@ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
>;
};
+ mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0ac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */
+ J721E_WKUP_IOPAD(0x0a8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */
+ >;
+ };
+
+ mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0bc, PIN_INPUT, 7) /* (F27) WKUP_GPIO0_3 */
+ >;
+ };
+
/* Reset for M.2 M Key slot on PCIe1 */
mkey_reset_pins_default: mkey-reset-pns-default-pins {
pinctrl-single,pins = <
@@ -1108,6 +1196,34 @@ &pcie1_rc {
num-lanes = <2>;
};
+&mcu_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan0_pins_default>;
+ phys = <&transceiver1>;
+ status = "okay";
+};
+
+&main_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan0_pins_default>;
+ phys = <&transceiver2>;
+ status = "okay";
+};
+
+&main_mcan5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan5_pins_default>;
+ phys = <&transceiver3>;
+ status = "okay";
+};
+
+&main_mcan9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan9_pins_default>;
+ phys = <&transceiver4>;
+ status = "okay";
+};
+
&ufs_wrapper {
status = "disabled";
};
--
2.34.1
More information about the linux-arm-kernel
mailing list