[PATCH v3] arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances
Beleswar Prasad Padhi
b-padhi at ti.com
Mon Apr 29 22:04:00 PDT 2024
Hi Bhavya,
On 15/04/24 13:52, Bhavya Kapoor wrote:
> On 12/04/24 16:50, Beleswar Padhi wrote:
>> CAN instance 0 in the mcu domain is brought on the J721E-SK board
>> through header J1. Thus, add its respective transceiver 1 dt node to add
>> support for this CAN instance.
>>
>> CAN instances 0, 5 and 9 in the main domain are brought on the J721E-SK
>> board through headers J5, J6 and J2 respectively. Thus, add their
>> respective transceivers 2, 3 and 4 dt nodes to add support for these CAN
>> instances.
>>
>> Signed-off-by: Beleswar Padhi <b-padhi at ti.com>
> Reviewed-by: Bhavya Kapoor <b-kapoor at ti.com>
>> ---
>> Test logs: https://gist.github.com/3V3RYONE/2144fa883bf3a390981d25572971fcf3
>>
>> v3: Changelog:
>> 1) Updated board name in capital letters in commit message description
>> 2) Updated test logs to include communication between all applicable CAN
>> instances
>>
>> Link to v2:
>> https://lore.kernel.org/linux-arm-kernel/20240325103405.182692-1-b-padhi@ti.com/
>>
>> v2: Changelog:
>> 1) Re-ordered status = "okay" property to the end of all applicable dt
>> nodes following kernel documentation
>>
>> Link to v1:
>> https://lore.kernel.org/linux-arm-kernel/20240315124728.490331-1-b-padhi@ti.com/
>>
>> arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 116 +++++++++++++++++++++++++
>> 1 file changed, 116 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
>> index 0c4575ad8d7c..7170f0220afd 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
>> @@ -210,6 +210,42 @@ vdd_sd_dv_alt: gpio-regulator-tps659411 {
>> <3300000 0x1>;
>> };
>>
>> + transceiver1: can-phy0 {
> Hi Beleswar, all looks good to me just one little suggestion to keep
>
> transceiver and can-phy number as same for better understanding
>
> and to avoid some bit of confusion later.
>
> Eg.) transceiver<x>: can-phy<x>
Thanks for the review. I will send PATCH v4 with these changes shortly.
>
>> + compatible = "ti,tcan1042";
>> + #phy-cells = <0>;
>> + max-bitrate = <5000000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
>> + standby-gpios = <&wkup_gpio0 3 GPIO_ACTIVE_HIGH>;
>> + };
>> +
>> + transceiver2: can-phy1 {
>> + compatible = "ti,tcan1042";
>> + #phy-cells = <0>;
>> + max-bitrate = <5000000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&main_mcan0_gpio_pins_default>;
>> + standby-gpios = <&main_gpio0 65 GPIO_ACTIVE_HIGH>;
>> + };
>> +
>> + transceiver3: can-phy2 {
>> + compatible = "ti,tcan1042";
>> + #phy-cells = <0>;
>> + max-bitrate = <5000000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&main_mcan5_gpio_pins_default>;
>> + standby-gpios = <&main_gpio0 66 GPIO_ACTIVE_HIGH>;
>> + };
>> +
>> + transceiver4: can-phy3 {
>> + compatible = "ti,tcan1042";
>> + #phy-cells = <0>;
>> + max-bitrate = <5000000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&main_mcan9_gpio_pins_default>;
>> + standby-gpios = <&main_gpio0 67 GPIO_ACTIVE_HIGH>;
>> + };
>> +
>> dp_pwr_3v3: fixedregulator-dp-prw {
>> compatible = "regulator-fixed";
>> regulator-name = "dp-pwr";
>> @@ -367,6 +403,45 @@ J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */
>> >;
>> };
>>
>> + main_mcan0_pins_default: main-mcan0-default-pins {
>> + pinctrl-single,pins = <
>> + J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */
>> + J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */
>> + >;
>> + };
>> +
>> + main_mcan0_gpio_pins_default: main-mcan0-gpio-default-pins {
>> + pinctrl-single,pins = <
>> + J721E_IOPAD(0x108, PIN_INPUT, 7) /* (AD27) PRG0_PRU1_GPO2.GPIO0_65 */
>> + >;
>> + };
>> +
>> + main_mcan5_pins_default: main-mcan5-default-pins {
>> + pinctrl-single,pins = <
>> + J721E_IOPAD(0x050, PIN_INPUT, 6) /* (AE21) PRG1_PRU0_GPO18.MCAN5_RX */
>> + J721E_IOPAD(0x04c, PIN_OUTPUT, 6) /* (AJ21) PRG1_PRU0_GPO17.MCAN5_TX */
>> + >;
>> + };
>> +
>> + main_mcan5_gpio_pins_default: main-mcan5-gpio-default-pins {
>> + pinctrl-single,pins = <
>> + J721E_IOPAD(0x10c, PIN_INPUT, 7) /* (AC25) PRG0_PRU1_GPO3.GPIO0_66 */
>> + >;
>> + };
>> +
>> + main_mcan9_pins_default: main-mcan9-default-pins {
>> + pinctrl-single,pins = <
>> + J721E_IOPAD(0x0d0, PIN_INPUT, 6) /* (AC27) PRG0_PRU0_GPO8.MCAN9_RX */
>> + J721E_IOPAD(0x0cc, PIN_OUTPUT, 6) /* (AC28) PRG0_PRU0_GPO7.MCAN9_TX */
>> + >;
>> + };
>> +
>> + main_mcan9_gpio_pins_default: main-mcan9-gpio-default-pins {
>> + pinctrl-single,pins = <
>> + J721E_IOPAD(0x110, PIN_INPUT, 7) /* (AD29) PRG0_PRU1_GPO4.GPIO0_67 */
>> + >;
>> + };
>> +
>> dp0_pins_default: dp0-default-pins {
>> pinctrl-single,pins = <
>> J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
>> @@ -555,6 +630,19 @@ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
>> >;
>> };
>>
>> + mcu_mcan0_pins_default: mcu-mcan0-default-pins {
>> + pinctrl-single,pins = <
>> + J721E_WKUP_IOPAD(0x0ac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */
>> + J721E_WKUP_IOPAD(0x0a8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */
>> + >;
>> + };
>> +
>> + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
>> + pinctrl-single,pins = <
>> + J721E_WKUP_IOPAD(0x0bc, PIN_INPUT, 7) /* (F27) WKUP_GPIO0_3 */
>> + >;
>> + };
>> +
>> /* Reset for M.2 M Key slot on PCIe1 */
>> mkey_reset_pins_default: mkey-reset-pns-default-pins {
>> pinctrl-single,pins = <
>> @@ -1108,6 +1196,34 @@ &pcie1_rc {
>> num-lanes = <2>;
>> };
>>
>> +&mcu_mcan0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&mcu_mcan0_pins_default>;
>> + phys = <&transceiver1>;
>> + status = "okay";
>> +};
>> +
>> +&main_mcan0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&main_mcan0_pins_default>;
>> + phys = <&transceiver2>;
>> + status = "okay";
>> +};
>> +
>> +&main_mcan5 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&main_mcan5_pins_default>;
>> + phys = <&transceiver3>;
>> + status = "okay";
>> +};
>> +
>> +&main_mcan9 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&main_mcan9_pins_default>;
>> + phys = <&transceiver4>;
>> + status = "okay";
>> +};
>> +
>> &ufs_wrapper {
>> status = "disabled";
>> };
More information about the linux-arm-kernel
mailing list