[PATCH v2] arm64: dts: ti: k3-am642-evm-icssg1-dualemac: add overlay for mii mode
MD Danish Anwar
danishanwar at ti.com
Mon Apr 29 02:29:19 PDT 2024
Add device tree overlay to enable both ICSSG1 ports available on AM64x-EVM
in MII mode.
Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
---
This is v2 of the series v1 [1]
Changes from v1 to v2:
*) Rebased the patch on next-20240429 linux-next tag.
*) Added "GPL-2.0-only OR MIT" in the license as pointed out by
Ravi Gunasekaran <r-gunasekaran at ti.com>
[1] https://lore.kernel.org/all/20240423090028.1311635-1-danishanwar@ti.com/
arch/arm64/boot/dts/ti/Makefile | 4 +
.../ti/k3-am642-evm-icssg1-dualemac-mii.dtso | 101 ++++++++++++++++++
2 files changed, 105 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac-mii.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 48fb19a523bd..f35f8af23264 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -44,6 +44,7 @@ k3-am642-hummingboard-t-usb3-dtbs := \
k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-usb3.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac-mii.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-pcie.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-usb3.dtb
@@ -134,6 +135,8 @@ k3-am62p5-sk-csi2-tevi-ov5640-dtbs := k3-am62p5-sk.dtb \
k3-am62x-sk-csi2-tevi-ov5640.dtbo
k3-am642-evm-icssg1-dualemac-dtbs := \
k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo
+k3-am642-evm-icssg1-dualemac-mii-dtbs := \
+ k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac-mii.dtbo
k3-am642-phyboard-electra-gpio-fan-dtbs := \
k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-gpio-fan.dtbo
k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
@@ -168,6 +171,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-am62p5-sk-csi2-ov5640.dtb \
k3-am62p5-sk-csi2-tevi-ov5640.dtb \
k3-am642-evm-icssg1-dualemac.dtb \
+ k3-am642-evm-icssg1-dualemac-mii.dtb \
k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \
k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
k3-am68-sk-base-board-csi2-dual-imx219-dtbs \
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac-mii.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac-mii.dtso
new file mode 100644
index 000000000000..423d6027278d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac-mii.dtso
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT overlay for enabling both ICSSG1 port on AM642 EVM in MII mode
+ *
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ aliases {
+ ethernet1 = "/icssg1-eth/ethernet-ports/port at 1";
+ };
+
+ mdio-mux-2 {
+ compatible = "mdio-mux-multiplexer";
+ mux-controls = <&mdio_mux>;
+ mdio-parent-bus = <&icssg1_mdio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio at 0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg1_phy2: ethernet-phy at 3 {
+ reg = <3>;
+ };
+ };
+ };
+};
+
+&main_pmx0 {
+ icssg1_mii1_pins_default: icssg1-mii1-default-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x00f8, PIN_INPUT, 1) /* (V9) PRG1_PRU0_GPO16.PR1_MII_MT0_CLK */
+ AM64X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (Y9) PRG1_PRU0_GPO15.PR1_MII0_TXEN */
+ AM64X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (AA9) PRG1_PRU0_GPO14.PR1_MII0_TXD3 */
+ AM64X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (W9) PRG1_PRU0_GPO13.PR1_MII0_TXD2 */
+ AM64X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (U9) PRG1_PRU0_GPO12.PR1_MII0_TXD1 */
+ AM64X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA8) PRG1_PRU0_GPO11.PR1_MII0_TXD0 */
+ AM64X_IOPAD(0x00c8, PIN_INPUT, 1) /* (Y8) PRG1_PRU0_GPO4.PR1_MII0_RXDV */
+ AM64X_IOPAD(0x00d0, PIN_INPUT, 1) /* (AA7) PRG1_PRU0_GPO6.PR1_MII_MR0_CLK */
+ AM64X_IOPAD(0x00c4, PIN_INPUT, 1) /* (V8) PRG1_PRU0_GPO3.PR1_MII0_RXD3 */
+ AM64X_IOPAD(0x00c0, PIN_INPUT, 1) /* (W8) PRG1_PRU0_GPO2.PR1_MII0_RXD2 */
+ AM64X_IOPAD(0x00cc, PIN_INPUT, 1) /* (V13) PRG1_PRU0_GPO5.PR1_MII0_RXER */
+ AM64X_IOPAD(0x00bc, PIN_INPUT, 1) /* (U8) PRG1_PRU0_GPO1.PR1_MII0_RXD1 */
+ AM64X_IOPAD(0x00b8, PIN_INPUT, 1) /* (Y7) PRG1_PRU0_GPO0.PR1_MII0_RXD0 */
+ AM64X_IOPAD(0x00d8, PIN_INPUT, 1) /* (W13) PRG1_PRU0_GPO8.PR1_MII0_RXLINK */
+ >;
+ };
+
+ icssg1_mii2_pins_default: icssg1-mii2-default-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0148, PIN_INPUT, 1) /* (Y10) PRG1_PRU1_GPO16.PR1_MII_MT1_CLK */
+ AM64X_IOPAD(0x0144, PIN_OUTPUT, 0) /* (Y11) PRG1_PRU1_GPO15.PR1_MII1_TXEN */
+ AM64X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AA11) PRG1_PRU1_GPO14.PR1_MII1_TXD3 */
+ AM64X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (U10) PRG1_PRU1_GPO13.PR1_MII1_TXD2 */
+ AM64X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (V10) PRG1_PRU1_GPO12.PR1_MII1_TXD1 */
+ AM64X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AA10) PRG1_PRU1_GPO11.PR1_MII1_TXD0 */
+ AM64X_IOPAD(0x0118, PIN_INPUT, 1) /* (W12) PRG1_PRU1_GPO4.PR1_MII1_RXDV */
+ AM64X_IOPAD(0x0120, PIN_INPUT, 1) /* (U11) PRG1_PRU1_GPO6.PR1_MII_MR1_CLK */
+ AM64X_IOPAD(0x0114, PIN_INPUT, 1) /* (Y12) PRG1_PRU1_GPO3.PR1_MII1_RXD3 */
+ AM64X_IOPAD(0x0110, PIN_INPUT, 1) /* (AA12) PRG1_PRU1_GPO2.PR1_MII1_RXD2 */
+ AM64X_IOPAD(0x011c, PIN_INPUT, 1) /* (AA13) PRG1_PRU1_GPO5.PR1_MII1_RXER */
+ AM64X_IOPAD(0x010c, PIN_INPUT, 1) /* (V11) PRG1_PRU1_GPO1.PR1_MII1_RXD1 */
+ AM64X_IOPAD(0x0108, PIN_INPUT, 1) /* (W11) PRG1_PRU1_GPO0.PR1_MII1_RXD0 */
+ AM64X_IOPAD(0x0128, PIN_INPUT, 1) /* (U12) PRG1_PRU1_GPO8.PR1_MII1_RXLINK */
+ >;
+ };
+};
+
+&cpsw3g {
+ pinctrl-0 = <&rgmii1_pins_default>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&mdio_mux_1 {
+ status = "disabled";
+};
+
+&icssg1_eth {
+ pinctrl-0 = <&icssg1_mii1_pins_default &icssg1_mii2_pins_default>;
+};
+
+&icssg1_emac0 {
+ phy-mode = "mii";
+};
+
+&icssg1_emac1 {
+ status = "okay";
+ phy-handle = <&icssg1_phy2>;
+ phy-mode = "mii";
+};
--
2.34.1
More information about the linux-arm-kernel
mailing list