[PATCH v2 2/2] arm64: dts: ti: k3-am62a7: Add overlay for second CPSW3G Port

[Ravi Gunasekaran]

On 4/25/24 3:50 PM, Chintan Vankar wrote:
> From: Siddharth Vadapalli <s-vadapalli at ti.com>
> 
> The SK-Ethernet-DC01 Add-On Ethernet Card for AM62A7-SK board supports
> RGMII mode.
> 
> Add overlay to enable the second CPSW3G port in RGMII-RXID mode with the
> Add-On Ethernet Card.
> 
> Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
> Signed-off-by: Chintan Vankar <c-vankar at ti.com>
> ---
> 
> Link to v1:
> https://lore.kernel.org/r/20230424111945.3865240-3-s-vadapalli@ti.com/
> 
> Changes from v1 to v2:
> - Since support for device tree overlays for am62a7-sk is already enabled
>   by commit "635ed9715194", it is removed from this series.
> 
>  arch/arm64/boot/dts/ti/Makefile               |  3 +
>  .../dts/ti/k3-am62a7-sk-ethernet-dc01.dtso    | 61 +++++++++++++++++++
>  2 files changed, 64 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am62a7-sk-ethernet-dc01.dtso
> 
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index c76b41f86527..8c55e46d9f98 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -27,6 +27,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
>  
>  # Boards with AM62Ax SoC
>  dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk-ethernet-dc01.dtbo
>  
>  # Boards with AM62Px SoC
>  dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
> @@ -123,6 +124,8 @@ k3-am62a7-sk-csi2-ov5640-dtbs := k3-am62a7-sk.dtb \
>  	k3-am62x-sk-csi2-ov5640.dtbo
>  k3-am62a7-sk-csi2-tevi-ov5640-dtbs := k3-am62a7-sk.dtb \
>  	k3-am62x-sk-csi2-tevi-ov5640.dtbo
> +k3-am62a7-sk-ethernet-dc01-dtbs := k3-am62a7-sk.dtb \
> +	k3-am62a7-sk-ethernet-dc01.dtbo
>  k3-am62a7-sk-hdmi-audio-dtbs := k3-am62a7-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
>  k3-am62p5-sk-csi2-imx219-dtbs := k3-am62p5-sk.dtb \
>  	k3-am62x-sk-csi2-imx219.dtbo
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk-ethernet-dc01.dtso b/arch/arm64/boot/dts/ti/k3-am62a7-sk-ethernet-dc01.dtso
> new file mode 100644
> index 000000000000..f6d5a089a717
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk-ethernet-dc01.dtso
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: GPL-2.0

Please update the license to "GPL-2.0-only OR MIT"

> +/**
> + * DT Overlay for second CPSW3G port in RGMII mode using SK-ETHERNET-DC01
> + * Add-On Daughtercard with AM62A7-SK.
> + *
> + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/net/ti-dp83867.h>
> +#include "k3-pinctrl.h"
> +
> +&{/} {
> +	aliases {
> +		ethernet1 = "/bus at f0000/ethernet at 8000000/ethernet-ports/port at 2";
> +	};
> +};
> +
> +&cpsw3g {
> +	pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;


One entry per line like below

pinctrl-0 = <&main_rgmii1_pins_default>,
	    <&main_rgmii2_pins_default>;

> +};
> +
> +&cpsw_port2 {
> +	status = "okay";
> +	phy-mode = "rgmii-rxid";
> +	phy-handle = <&cpsw3g_phy1>;
> +};
> +
> +&cpsw3g_mdio {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	cpsw3g_phy1: ethernet-phy at 1 {
> +		reg = <1>;
> +		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> +		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> +		ti,min-output-impedance;
> +	};
> +};
> +
> +&main_pmx0 {
> +	main_rgmii2_pins_default: main-rgmii2-default-pins {
> +		pinctrl-single,pins = <
> +			AM62AX_IOPAD(0x0184, PIN_INPUT, 0) /* (AA21) RGMII2_RD0 */
> +			AM62AX_IOPAD(0x0188, PIN_INPUT, 0) /* (Y20) RGMII2_RD1 */
> +			AM62AX_IOPAD(0x018c, PIN_INPUT, 0) /* (AB21) RGMII2_RD2 */
> +			AM62AX_IOPAD(0x0190, PIN_INPUT, 0) /* (AB20) RGMII2_RD3 */
> +			AM62AX_IOPAD(0x0180, PIN_INPUT, 0) /* (AA20) RGMII2_RXC */
> +			AM62AX_IOPAD(0x017c, PIN_INPUT, 0) /* (W18) RGMII2_RX_CTL */
> +			AM62AX_IOPAD(0x016c, PIN_INPUT, 0) /* (AA19) RGMII2_TD0 */
> +			AM62AX_IOPAD(0x0170, PIN_INPUT, 0) /* (Y18) RGMII2_TD1 */
> +			AM62AX_IOPAD(0x0174, PIN_INPUT, 0) /* (AA18) RGMII2_TD2 */
> +			AM62AX_IOPAD(0x0178, PIN_INPUT, 0) /* (W17) RGMII2_TD3 */
> +			AM62AX_IOPAD(0x0168, PIN_INPUT, 0) /* (AB19) RGMII2_TXC */
> +			AM62AX_IOPAD(0x0164, PIN_INPUT, 0) /* (Y19) RGMII2_TX_CTL */
> +		>;
> +	};
> +};

-- 
Regards,
Ravi