[PATCH v3 02/11] PCI: imx6: Fix i.MX8MP PCIe EP can not trigger MSI

[Manivannan Sadhasivam]

On Tue, Apr 02, 2024 at 10:33:38AM -0400, Frank Li wrote:
> From: Richard Zhu <hongxing.zhu at nxp.com>
> 
> Fix i.MX8MP PCIe EP can't trigger MSI issue.
> There is one 64Kbytes minimal requirement on i.MX8M PCIe outbound
> region configuration.
> 
> EP uses Bar0 to set the outboud region to configure the MSI setting.

I don't understand this statement. How EP can use BAR0 for MSI? MSIs are
triggered using outbound window memory while BARs are mapped as inbound.

- Mani

> Set the page_size to "epc_features->align" to meet the requirement,
> let the MSI can be triggered successfully.
> 
> Fixes: 1bd0d43dcf3b ("PCI: imx6: Clean up addr_space retrieval code")
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> Acked-by: Jason Liu <jason.hui.liu at nxp.com>
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index e43eda6b33ca7..6c4d25b92225e 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1118,6 +1118,8 @@ static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie,
>  	if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_SUPPORT_64BIT))
>  		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
>  
> +	ep->page_size = imx6_pcie->drvdata->epc_features->align;
> +
>  	ret = dw_pcie_ep_init(ep);
>  	if (ret) {
>  		dev_err(dev, "failed to initialize endpoint\n");
> 
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்