[PATCH 0/2] Set PHY address of MT7531 switch to 0x1f on MediaTek arm64 boards

[Arınç ÜNAL]

On 23.04.2024 12:16, Arınç ÜNAL wrote:
> On 08/04/2024 10:22, Arınç ÜNAL wrote:
>> On 31.03.2024 12:28, arinc.unal at arinc9.com wrote:
>>> On 14.03.2024 15:20, Arınç ÜNAL via B4 Relay wrote:
>>>> Hello.
>>>>
>>>> This is a small patch series setting the PHY address of MT7531 to 0x1f on
>>>> all boards that have the switch.
>>>>
>>>> Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
>>>> ---
>>>> Arınç ÜNAL (2):
>>>>        arm64: dts: mediatek: mt7622: set PHY address of MT7531 switch to 0x1f
>>>>        arm64: dts: mediatek: mt7986: set PHY address of MT7531 switch to 0x1f
>>>>
>>>>   arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++--
>>>>   arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts             | 4 ++--
>>>>   arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 4 ++--
>>>>   arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts             | 4 ++--
>>>>   arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts             | 4 ++--
>>>>   5 files changed, 10 insertions(+), 10 deletions(-)
>>>> ---
>>>> base-commit: ba90af39ba57b3fe3ecfdba0c87a80d20c7b788d
>>>> change-id: 20240314-for-mediatek-mt7531-phy-address-9d0b4cfeca21
>>>>
>>>> Best regards,
>>>
>>> Reminder that this patch series is waiting.
>>
>> Another reminder that this patch series is waiting to be applied.
> 
> Here's the third reminder for someone to apply this. From now on, I am
> going to reply to this thread once every day until this patch series is
> applied.

Fourth.

Arınç