[PATCH v5 0/3] arm64: dts: imx93: add i.Core MX93 EDIMM 2.0 board

[Fabio Aiuto]

Hello all,

this patchset adds support for i.Core MX93 EDIMM 2.0 Starter Kit,
a SoM + Evaluation Board combination from Engicam.

The number of patch has diminished to 3, for I dropped the
patch introducing a change in nxp,pca9450 binding which has
been already submitted in regulator tree.

(Dropped also regulator tree maintainers as recipients for
they aren't anymore involved in this patchset)

This patchset introduces just basic functionality for board.

Thanks in advance,

fabio
---
v4 ---> v5:
	- done some property reorder, indentation fixes,
	  node rename, drop/add new-lines
	- fixed line wrap in 2nd patch commit log
	- added Reviewed-by tag
v3 ---> v4:
        - drop wl_reg_on regulator in favor of
          mmc-pwrseq-simple
v2 ---> v3:
        - fixed dtschema warnings
        - added Acked/Reviewed-by tags
        - removed regulator-always-on on
          bt_reg_on
        - fixed clock rate assignment on
          sgtl5000 node
        - added wdog_b-warm-reset; property in pmic
        - fixed indentation issue
v1 ---> v2:
        - dropped patch updating nxp,pca9450 binding
        - fixed indentation issue
        - fixed missing space issue
        - improved naming of regulator nodes
        - removed unneeded include
        - fixed email recipients


Fabio Aiuto (3):
  dt-bindings: arm: fsl: add Engicam i.Core MX93 EDIMM 2.0 Starter Kit
  arm64: dts: imx93: add Engicam i.Core MX93 SoM
  arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

 .../devicetree/bindings/arm/fsl.yaml          |   7 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx93-icore-mx93-edimm2.dts | 343 ++++++++++++++++++
 .../boot/dts/freescale/imx93-icore-mx93.dtsi  | 269 ++++++++++++++
 4 files changed, 620 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93.dtsi

-- 
2.34.1