[PATCH] perf: RISC-V: Check standard event availability

[Atish Kumar Patra]

On Wed, Apr 24, 2024 at 11:27 AM Ian Rogers <irogers at google.com> wrote:
>
> On Wed, Apr 24, 2024 at 6:31 AM Andrew Jones <ajones at ventanamicro.com> wrote:
> >
> > On Tue, Apr 23, 2024 at 05:36:43PM -0700, Atish Kumar Patra wrote:
> > > On Mon, Apr 22, 2024 at 8:44 PM Ian Rogers <irogers at google.com> wrote:
> > > >
> > > > On Mon, Apr 15, 2024 at 9:07 PM Anup Patel <anup at brainfault.org> wrote:
> > > > >
> > > > > On Tue, Apr 16, 2024 at 5:31 AM Atish Patra <atishp at rivosinc.com> wrote:
> > > > > >
> > > > > > On 4/10/24 18:40, Samuel Holland wrote:
> > > > > > > Hi Atish,
> > > > > > >
> > > > > > > On 2024-03-18 2:44 PM, Atish Patra wrote:
> > > > > > >> On Wed, Jan 3, 2024 at 8:54 AM Samuel Holland <samuel.holland at sifive.com> wrote:
> > > > > > >>>
> > > > > > >>> The RISC-V SBI PMU specification defines several standard hardware and
> > > > > > >>> cache events. Currently, all of these events appear in the `perf list`
> > > > > > >>> output, even if they are not actually implemented. Add logic to check
> > > > > > >>> which events are supported by the hardware (i.e. can be mapped to some
> > > > > > >>> counter), so only usable events are reported to userspace.
> > > > > > >>>
> > > > > > >>
> > > > > > >> Thanks for the patch.
> > > > > > >> This adds tons of SBI calls at every boot for a use case which is at
> > > > > > >> best confusing for a subset of users who actually wants to run perf.
> > > > > > >
> > > > > > > I should have been clearer in the patch description. This is not just a cosmetic
> > > > > > > change; because perf sees these as valid events, it tries to use them in
> > > > > > > commands like `perf stat`. When the error from SBI_EXT_PMU_COUNTER_CFG_MATCH
> > > > > > > causes the ->add() callback to fail, this prevents any other events from being
> > > > > > > scheduled on that same CPU (search can_add_hw in kernel/events/core.c). That is
> > > > > > > why the dTLB/iTLB miss counts are missing in the "before" example below.
> > > > > > >
> > > > > >
> > > > > > Thanks for explaining the problem. I can reproduce it in qemu as well if
> > > > > > enough number of invalid events given on the command line and the
> > > > > > workload is short enough.
> > > > > >
> > > > > > >> This probing can be done at runtime by invoking the
> > > > > > >> pmu_sbi_check_event from pmu_sbi_event_map.
> > > > > > >> We can update the event map after that so that it doesn't need to
> > > > > > >> invoke pmu_sbi_check_event next time.
> > > > > > >
> > > > > > > I tried to implement this suggestion, but it did not work. The SBI interface
> > > > > > > does not distinguish between "none of the counters can monitor the specified
> > > > > > > event [because the event is unsupported]" and "none of the counters can monitor
> > > > > > > the specified event [because the counters are busy]". It is not sufficient for
> > > > > > > the kernel to verify that at least one counter is available before performing
> > > > > > > the check, because certain events may only be usable on a subset of counters
> > > > > > > (per riscv,event-to-mhpmcounters), and the kernel does not know that mapping.
> > > > > > >
> > > > > >
> > > > > > Yeah. My suggestion was to fix the perf list issue which is different
> > > > > > than the issue reported now.
> > > > > >
> > > > > > > As a result, checking for event support is only reliable when none of the
> > > > > > > counters are in use. So the check can be asynchronous/deferred to later in the
> > > > > > > boot process, but I believe it still needs to be performed for all events before
> > > > > > > userspace starts using the counters.
> > > > > > >
> > > > > >
> > > > > > We should defer it a work queue for sure. We can also look at improving
> > > > > > SBI PMU extension to support bulk matching behavior as well.
> > > > > >
> > > > > > However, I think a better solution would be to just rely on the json
> > > > > > file mappings instead of making SBI calls. We are going to have the
> > > > > > event encoding and mappings in the json in the future.
> > > > >
> > > > > The problem with JSON based event encoding is how to deal in-case
> > > > > we are running inside Guest/VM because Host could be anything.
> > > > >
> > > > > IMO, the JSON based approach is not suitable for SBI PMU. For now,
> > > > > we either defer the work using the work queue or keep the approach
> > > > > of this patch as-is.
> > > > >
> > > > > The good part about SBI PMU extension is that we do have a standard
> > > > > set of events and we only need a way to discover supported standard
> > > > > events with a minimum number of SBI calls. It is better to add a new
> > > > > SBI PMU call to assist supported event discovery which will also
> > > > > help us virtualize it.
> > > > >
> > > > > Regards,
> > > > > Anup
> > > >
> > > > +Ian Rogers
> > > >
> > > > `perf list` will already filter some events depending on whether the
> > > > PMU supports them, for example, legacy cache events. I think we can
> > > > extend this to json events.
> > > >
> > >
> > > Yes. That's what I was thinking as well. However, that may be a
> > > problem in virtualization
> > > as Anup pointed out.
> > >
> > > As per my understanding, cloud providers provide json files for VMs
> > > based on the host
> > > architecture and allow migration only between hosts with the same
> > > family of cpu. In RISC-V, the mapfile.csv works based on 3 registers
> > > indicating marchid, mimpid, and mvendorid. Thus, the json file has to
> > > be tied with the host machine it is going to be run.
> >
> > This is also my understanding. That is, that cloud instances typically
> > dedicate CPUs to VMs and don't try to present CPU models to VMs which
> > don't exactly match the host's CPUs. The remaining concern would be if
> > the hypervisor doesn't emulate/passthrough everything the json describes
> > for the host CPU type.
>

x86/ARM64 kvm also can filter any event for the guest they want.

> So this isn't accurate. For x86 perf uses the CPUID instruction. A
> host operating system can change the CPUID for a guest, say pretending
> a newer CPU model is actually an older one. This can be done when
> migrating VMs as having the CPUID change dynamically in a guest would
> be a problem. VM migration like this can have issues and it is fair to
> say that it is avoided.
>

I was specifically asking if the json file is updated for a guest when migrated
if the events supported on the destination host are different than the
source host ?

Or The VM migration across different CPUIDs (e.g different family of CPUs)
are avoided completely. It seems the latter from your statement ?


> Fwiw, a particular problem we have with x86 guests is the host hiding
> CPUID leaves that describe things like the frequency of the CPU. It is
> difficult to compute metrics in units of time when you don't know what
> frequency cycles relates to.
>
> > However, this is just "typical" clouds. All bets are off for general
> > virtualization, as Anup points out.
> >
> > >
> > > We will end up doing the same if we only rely on the json file to
> > > filter events in the future. Please let me know if the assumption is
> > > incorrect.
> > >
> > > If we allow a SBI call route to discover which events are supported,
> > > the guest can always support legacy events on any host even though it
> > > doesn't have a json file.
> >
> > Yes, I think we need a solution which works even without a json file,
> > since a VM may use a special mvendorid,marchid,mimpid triplet to
> > describe a more generic CPU type. Unless we also create json files
> > for these VCPUs, or provide other event discovery mechanisms, then
> > the VMs will not have anything.
>

We have to create a json file for VMs anyways for raw events. Having
the discovery through
SBI call allows minimum guarantee for the perf legacy events.

> I think a set of generic events is a good thing, then the PMU driver
> can map perf's legacy events to the generic events in a clean way. I'm
> not sure what the issue is with RISC-V guest operating systems. To

The pertinent question here is how does the guest know the list of
supported generic or perf legacy
events as RISC-V doesn't have any standard event format/encoding
support. There are two approaches

1. Define a new SBI interface which allows the host to let the guest
know which events are supported at one shot.
The perf legacy events mappings are updated at guest boot time via
this interface. Currently, this patch achieves this
by iterating through all the possible legacy events and making an SBI
call one at a time during the boot.

2. Rely on the json file present (if) in the guest. In this case, all
the supported perf legacy events must be present in
the json. In absence of that, the driver assumes it is not supported.


> lower overhead on x86 pass-through PMUs are being explored, that is
> the guest operating system directly programming the CPU's performance
> counters to avoid hypervisor traps. For this to work the triplet
> mvendorid,marchid,mimpid should match that of the host.
>

Yes. I am tracking the pass through series for vPMU in x86.
RISC-V also doesn't have pass through support and implements counter
virtualization similar
to other architectures as well but we have less number of traps
because of the bulk access features.

> The perf tool supports the notion of a standard set of legacy events
> like instructions, cycles and certain cache events. More recently
> we've moved to prefer sysfs and json events over these, primarily
> because the Apple M1 ARM based Macs nobody was establishing the
> mapping from legacy to an actual event. Users were complaining that
> 'cycles' via a sysfs event worked, but when ARM was made like Intel
> and prioritized legacy first, we broke it. Now we prioritize sysfs and
> json way for all architectures and hopefully everyone is happy. The
> last clean up for this is in:
> https://lore.kernel.org/lkml/20240416061533.921723-1-irogers@google.com/
>
> Thanks,
> Ian
>
> > Thanks,
> > drew