[PATCH 00/18] i2c: remove printout on handled timeouts

[Andy Shevchenko]

On Wed, Apr 24, 2024 at 12:00 PM Wolfram Sang
<wsa+renesas at sang-engineering.com> wrote:
> On Wed, Apr 24, 2024 at 03:08:14AM +0300, Andy Shevchenko wrote:
> > Wed, Apr 10, 2024 at 01:24:14PM +0200, Wolfram Sang kirjoitti:
> > > While working on another cleanup series, I stumbled over the fact that
> > > some drivers print an error on I2C or SMBus related timeouts. This is
> > > wrong because it may be an expected state. The client driver on top
> > > knows this, so let's keep error handling on this level and remove the
> > > prinouts from controller drivers.
> > >
> > > Looking forward to comments,
> >
> > I do not see an equivalent change in I²C core.
>
> There shouldn't be. The core neither knows if it is okay or not. The
> client driver knows.
>
> > IIRC in our case (DW or i801 or iSMT) we often have this message as the only
>
> Often? How often?

Once in a couple of months I assume. Last time it was a few weeks ago
that there was a report and they pointed to this very message which
was helpful.

> > one that points to the issues (on non-debug level), it will be much harder to
> > debug for our customers with this going away.
>
> The proper fix is to print the error in the client driver. Maybe this
> needs a helper for client drivers which they can use like:
>
>         i2c_report_error(client, retval, flags);
>
> The other thing which is also more helpful IMO is that we have
> trace_events for __i2c_transfer. There, you can see what was happening
> on the bus before the timeout. It can easily be that, if device X
> times out, it was because of the transfer before to device Y which locks
> up the bus. A simple "Bus timed out" message will not help you a lot
> there.

The trace events are good to have, not sure if production kernels have
them enabled, though.

> And, keep in mind the false positives I mentioned in the coverletter.


-- 
With Best Regards,
Andy Shevchenko