[PATCH v2 3/4] PCI: imx6: Convert to agnostic GPIO API
Andy Shevchenko
andriy.shevchenko at linux.intel.com
Tue Apr 23 10:19:06 PDT 2024
The of_gpio.h is going to be removed. In preparation of that convert
the driver to the agnostic API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 37 ++++++++++-----------------
1 file changed, 14 insertions(+), 23 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 917c69edee1d..d620f1e1a43c 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -11,14 +11,13 @@
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_address.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
@@ -107,7 +106,7 @@ struct imx6_pcie_drvdata {
struct imx6_pcie {
struct dw_pcie *pci;
- int reset_gpio;
+ struct gpio_desc *reset_gpiod;
bool gpio_active_high;
bool link_is_up;
struct clk_bulk_data clks[IMX6_PCIE_MAX_CLKS];
@@ -721,9 +720,8 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
}
/* Some boards don't have PCIe reset GPIO. */
- if (gpio_is_valid(imx6_pcie->reset_gpio))
- gpio_set_value_cansleep(imx6_pcie->reset_gpio,
- imx6_pcie->gpio_active_high);
+ gpiod_set_raw_value_cansleep(imx6_pcie->reset_gpiod,
+ imx6_pcie->gpio_active_high);
}
static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
@@ -771,10 +769,10 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
}
/* Some boards don't have PCIe reset GPIO. */
- if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+ if (imx6_pcie->reset_gpiod) {
msleep(100);
- gpio_set_value_cansleep(imx6_pcie->reset_gpio,
- !imx6_pcie->gpio_active_high);
+ gpiod_set_raw_value_cansleep(imx6_pcie->reset_gpiod,
+ !imx6_pcie->gpio_active_high);
/* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */
msleep(100);
}
@@ -1285,22 +1283,15 @@ static int imx6_pcie_probe(struct platform_device *pdev)
return PTR_ERR(pci->dbi_base);
/* Fetch GPIOs */
- imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
imx6_pcie->gpio_active_high = of_property_read_bool(node,
"reset-gpio-active-high");
- if (gpio_is_valid(imx6_pcie->reset_gpio)) {
- ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
- imx6_pcie->gpio_active_high ?
- GPIOF_OUT_INIT_HIGH :
- GPIOF_OUT_INIT_LOW,
- "PCIe reset");
- if (ret) {
- dev_err(dev, "unable to get reset gpio\n");
- return ret;
- }
- } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
- return imx6_pcie->reset_gpio;
- }
+ imx6_pcie->reset_gpiod =
+ devm_gpiod_get_optional(dev, "reset",
+ imx6_pcie->gpio_active_high ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
+ if (IS_ERR(imx6_pcie->reset_gpiod))
+ return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpiod),
+ "unable to get reset gpio\n");
+ gpiod_set_consumer_name(imx6_pcie->reset_gpiod, "PCIe reset");
if (imx6_pcie->drvdata->clks_cnt >= IMX6_PCIE_MAX_CLKS)
return dev_err_probe(dev, -ENOMEM, "clks_cnt is too big\n");
--
2.43.0.rc1.1336.g36b5255a03ac
More information about the linux-arm-kernel
mailing list