[PATCH 5/5] ARM: orion5x: Convert TS409 board to GPIO descriptors for LEDs

[Linus Walleij]

This makes the LEDs on the TS409 Orion5x board use GPIO
descriptors instead of hardcoded GPIOs from the global
numberspace.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 arch/arm/mach-orion5x/ts409-setup.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 6f60dc1dfa22..8131982c10d9 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -8,6 +8,7 @@
  * Copyright (C) 2008  Martin Michlmayr <tbm at cyrius.com>
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -168,20 +169,27 @@ static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
 static struct gpio_led ts409_led_pins[] = {
 	{
 		.name		= "ts409:red:sata1",
-		.gpio		= 4,
-		.active_low	= 1,
 	}, {
 		.name		= "ts409:red:sata2",
-		.gpio		= 5,
-		.active_low	= 1,
 	}, {
 		.name		= "ts409:red:sata3",
-		.gpio		= 6,
-		.active_low	= 1,
 	}, {
 		.name		= "ts409:red:sata4",
-		.gpio		= 7,
-		.active_low	= 1,
+	},
+};
+
+static struct gpiod_lookup_table ts409_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL,
+				1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", 6, NULL,
+				2, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", 7, NULL,
+				3, GPIO_ACTIVE_LOW),
+		{ },
 	},
 };
 
@@ -300,6 +308,7 @@ static void __init qnap_ts409_init(void)
 	if (qnap_ts409_i2c_rtc.irq == 0)
 		pr_warn("qnap_ts409_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+	gpiod_add_lookup_table(&ts409_leds_gpio_table);
 	platform_device_register(&ts409_leds);
 
 	/* register tsx09 specific power-off method */

-- 
2.44.0