[PATCH 5/7] dt-bindings: counter: Update TI eQEP binding

[Krzysztof Kozlowski]

On 23/04/2024 00:11, Judith Mendez wrote:
>>>   
>>>     interrupts:
>>>       description: The eQEP event interrupt
>>>       maxItems: 1
>>>   
>>>     clocks:
>>> -    description: The clock that determines the SYSCLKOUT rate for the eQEP
>>> +    description: The clock that determines the clock rate for the eQEP
>>>         peripheral.
>>>       maxItems: 1
>>>   
>>>     clock-names:
>>> -    const: sysclkout
>>> +    maxItems: 1
>>
>> NAK. That's just wrong, not explained at all either.
>>
> 
> The intention was to make the binding a bit more generic, but I see
> that is not the correct direction to go, thanks for the feedback.

Bindings must be specific, because they describe the hardware. Your
hardware has exactly one clock input pin, not some superposition of pins
which change depending on photon stream.

Best regards,
Krzysztof