[PATCH v3 3/5] ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200

[Arınç ÜNAL via B4 Relay]

From: Arınç ÜNAL <arinc.unal at arinc9.com>

Add the device tree for ASUS RT-AC3200 which is an AC3200 router featuring
5 Ethernet ports over the integrated Broadcom switch.

Hardware info:
* Processor: Broadcom BCM4709A0 dual-core @ 1.0 GHz
* Switch: BCM53012 in BCM4709A0
* DDR3 RAM: 256 MB
* Flash: 128 MB
* 2.4GHz: BCM43602 3x3 single chip 802.11b/g/n SoC
* 5GHz: BCM43602 3x3 two chips 802.11a/n/ac SoC
* Ports: 4 LAN Ports, 1 WAN Port

Co-developed-by: Tom Brautaset <tbrautaset at gmail.com>
Signed-off-by: Tom Brautaset <tbrautaset at gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
---
 arch/arm/boot/dts/broadcom/Makefile                |   1 +
 .../boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts   | 150 +++++++++++++++++++++
 2 files changed, 151 insertions(+)

diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile
index 7099d9560033..c61fca514775 100644
--- a/arch/arm/boot/dts/broadcom/Makefile
+++ b/arch/arm/boot/dts/broadcom/Makefile
@@ -64,6 +64,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47081-luxul-xap-1410.dtb \
 	bcm47081-luxul-xwr-1200.dtb \
 	bcm47081-tplink-archer-c5-v2.dtb \
+	bcm4709-asus-rt-ac3200.dtb \
 	bcm4709-asus-rt-ac87u.dtb \
 	bcm4709-buffalo-wxr-1900dhp.dtb \
 	bcm4709-linksys-ea9200.dtb \
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
new file mode 100644
index 000000000000..53cb0c58f6d0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset at gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "asus,rt-ac3200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "ASUS RT-AC3200";
+
+	memory at 0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	nvram at 1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et0macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et0macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition at 0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition at 80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition at 200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port at 0 {
+			label = "wan";
+		};
+
+		port at 1 {
+			label = "lan1";
+		};
+
+		port at 2 {
+			label = "lan2";
+		};
+
+		port at 3 {
+			label = "lan3";
+		};
+
+		port at 4 {
+			label = "lan4";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};

-- 
2.40.1