[RFC PATCH v3 4/6] dt-bindings: clock: meson: document A1 SoC audio clock controller driver

[Jerome Brunet]

On Mon 22 Apr 2024 at 09:16, Jerome Brunet <jbrunet at baylibre.com> wrote:

> On Sun 21 Apr 2024 at 20:14, Krzysztof Kozlowski <krzk at kernel.org> wrote:
>
>> On 20/04/2024 18:15, Jan Dakinevich wrote:
>>> 
>>> 
>>> On 4/20/24 00:09, Rob Herring wrote:
>>>> On Fri, Apr 19, 2024 at 03:58:10PM +0300, Jan Dakinevich wrote:
>>>>> Add device tree bindings for A1 SoC audio clock and reset controllers.
>>>>>
>>>>> Signed-off-by: Jan Dakinevich <jan.dakinevich at salutedevices.com>
>>>>> ---
>>>>>
>>>>> This controller has 6 mandatory and up to 20 optional clocks. To describe
>>>>> this, I use 'additionalItems'. It produces correct processed-schema.json:
>>>>>
>>>>>   "clock-names": {
>>>>>       "maxItems": 26,
>>>>>       "items": [
>>>>>           {
>>>>>               "const": "pclk"
>>>>>           },
>>>>>           {
>>>>>               "const": "dds_in"
>>>>>           },
>>>>>           {
>>>>>               "const": "fclk_div2"
>>>>>           },
>>>>>           {
>>>>>               "const": "fclk_div3"
>>>>>           },
>>>>>           {
>>>>>               "const": "hifi_pll"
>>>>>           },
>>>>>           {
>>>>>               "const": "xtal"
>>>>>           }
>>>>>       ],
>>>>>       "additionalItems": {
>>>>>           "oneOf": [
>>>>>               {
>>>>>                   "pattern": "^slv_sclk[0-9]$"
>>>>>               },
>>>>>               {
>>>>>                   "pattern": "^slv_lrclk[0-9]$"
>>>>>               }
>>>>>           ]
>>>>>       },
>>>>>       "type": "array",
>>>>>       "minItems": 6
>>>>>   },
>>>>>
>>>>> and it behaves as expected. However, the checking is followed by
>>>>> complaints like this:
>>>>>
>>>>>   Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml: properties:clock-names:additionalItems: {'oneOf': [{'pattern': '^slv_sclk[0-9]$'}, {'pattern': '^slv_lrclk[0-9]$'}]} is not of type 'boolean'
>>>>>
>>>>> And indeed, 'additionalItems' has boolean type in meta-schema. So, how to
>>>>> do it right?
>>>>
>>>> The meta-schemas are written both to prevent nonsense that json-schema 
>>>> allows by default (e.g additionalitems (wrong case)) and constraints to 
>>>> follow the patterns we expect. I'm happy to loosen the latter case if 
>>>> there's really a need. 
>>>>
>>>> Generally, most bindings shouldn't be using 'additionalItems' at all as 
>>>> all entries should be defined, but there's a few exceptions. Here, the 
>>>> only reasoning I see is 26 entries is a lot to write out, but that 
>>>> wouldn't really justify it. 
>>> 
>>> Writing a lot of entries don't scary me too much, but the reason is that
>>> the existence of optional clock sources depends on schematics. Also, we
>>
>> Aren't you documenting SoC component, not a board? So how exactly it
>> depends on schematics? SoC is done or not done...
>>
>>> unable to declare dt-nodes for 'clocks' array in any generic way,
>>> because their declaration would depends on that what is actually
>>> connected to the SoC (dt-node could be "fixed-clock" with specific rate
>>> or something else).
>>
>> So these are clock inputs to the SoC?
>>
>
> Yes, possibly.
> Like an external crystal or a set clocks provided by an external codec
> where the codec is the clock master of the link.
>
> This is same case as the AXG that was discussed here:
> https://lore.kernel.org/linux-devicetree/20230808194811.113087-1-alexander.stein@mailbox.org/
>
> IMO, like the AXG, only the pclk is a required clock.
> All the others - master and slave clocks - are optional.
> The controller is designed to operate with grounded inputs

Looking again at the implementation of the controller, there is a clear
indication in patch 3 that the controller interface is the same as the
AXG and that the above statement is true.

The AXG had 8 master clocks wired in. The A1 just has 5 - and 3 grounded
master clocks. This is why you to had to provide a mux input table to
skip the grounded inputs. You would not have to do so if the controller was
properly declared with the 8 master clock input, as it actually is.

It also shows that it is a bad idea to name input after what is coming
in (like you do with "dds_in" or "fclk_div2") instead of what they
actually are like in the AXG (mst0, mst1, etc ...)

>
>>> 
>>> By the way, I don't know any example (neither for A1 SoC nor for other
>>> Amlogic's SoCs) where these optional clocks are used, but they are
>>> allowed by hw.
>
> Those scenario exists and have been tested. There is just no dts using
> that upstream because they are all mostly copy of the AML ref design.
>
>>> 
>>> This is my understanding of this controller. I hope, Jerome Brunet will
>>> clarify how it actually works.
>>
>
> I think the simpliest way to deal with this to just list all the clocks
> with 'minItems = 1'. It is going be hard to read with a lot of '<0>,' in
> the DTS when do need those slave clocks but at least the binding doc
> will be simple.
>
>> Best regards,
>> Krzysztof
>
> If you are going ahead with this, please name the file
> amlogic,axg-audio-clkc.yaml because this is really the first controller
> of the type and is meant to be documented in the same file.
>
> You are free to handle the conversion of the AXG at the same time if
> you'd like. It would be much appreciated if you do.


-- 
Jerome