[PATCH v3 0/3] arm64: dts: imx93: add i.Core MX93 EDIMM 2.0 board

Fabio Aiuto fabio.aiuto at engicam.com
Fri Apr 19 07:49:50 PDT 2024


Hello all,

this patchset adds support for i.Core MX93 EDIMM 2.0 Starter Kit,
a SoM + Evaluation Board combination from Engicam.

The number of patch has diminished to 3, for I dropped the
patch introducing a change in nxp,pca9450 binding which has
been already submitted in regulator tree.

(Dropped also regulator tree maintainers as recipients for
they aren't anymore involved in this patchset)

Thanks in advance,

fabio
---
v2 ---> v3:
	- fixed dtschema warnings
	- added Acked/Reviewed-by tags
	- removed regulator-always-on on
	  bt_reg_on
	- fixed clock rate assignment on
	  sgtl5000 node
	- added wdog_b-warm-reset; property in pmic
	- fixed indentation issue

v1 ---> v2:
        - dropped patch updating nxp,pca9450 binding
        - fixed indentation issue
        - fixed missing space issue
        - improved naming of regulator nodes
        - removed unneeded include
        - fixed email recipients

Fabio Aiuto (3):
  dt-bindings: arm: fsl: add Engicam i.Core MX93 EDIMM 2.0 Starter Kit
  arm64: dts: imx93: add Engicam i.Core MX93 SoM
  arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

 .../devicetree/bindings/arm/fsl.yaml          |   7 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx93-icore-mx93-edimm2.dts | 347 ++++++++++++++++++
 .../boot/dts/freescale/imx93-icore-mx93.dtsi  | 271 ++++++++++++++
 4 files changed, 626 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93.dtsi

-- 
2.34.1




More information about the linux-arm-kernel mailing list