[PATCH v2 01/12] arm64: dts: imx93: use FSL_EDMA_RX for rx channel

Frank Li Frank.li at nxp.com
Fri Apr 19 07:26:38 PDT 2024


On Fri, Apr 19, 2024 at 11:36:56AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
> 
> Use FSL_EDMA_RX for dma rx channel bitmask, which is intuitive.
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>

Reviewed-by: Frank Li <Frank.Li at nxp.com>

> ---
>  arch/arm64/boot/dts/freescale/imx93.dtsi | 25 +++++++++++++------------
>  1 file changed, 13 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index b8ef9b938856..42bbe491a29b 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -4,6 +4,7 @@
>   */
>  
>  #include <dt-bindings/clock/imx93-clock.h>
> +#include <dt-bindings/dma/fsl-edma.h>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -361,7 +362,7 @@ lpuart1: serial at 44380000 {
>  				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
>  				clock-names = "ipg";
> -				dmas = <&edma1 17 0 1>, <&edma1 16 0 0>;
> +				dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> @@ -372,7 +373,7 @@ lpuart2: serial at 44390000 {
>  				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
>  				clock-names = "ipg";
> -				dmas = <&edma1 19 0 1>, <&edma1 18 0 0>;
> +				dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> @@ -400,7 +401,7 @@ sai1: sai at 443b0000 {
>  					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
>  					 <&clk IMX93_CLK_DUMMY>;
>  				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
> -				dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
> +				dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> @@ -737,7 +738,7 @@ lpuart3: serial at 42570000 {
>  				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
>  				clock-names = "ipg";
> -				dmas = <&edma2 18 0 1>, <&edma2 17 0 0>;
> +				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> @@ -748,7 +749,7 @@ lpuart4: serial at 42580000 {
>  				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
>  				clock-names = "ipg";
> -				dmas = <&edma2 20 0 1>, <&edma2 19 0 0>;
> +				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> @@ -759,7 +760,7 @@ lpuart5: serial at 42590000 {
>  				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
>  				clock-names = "ipg";
> -				dmas = <&edma2 22 0 1>, <&edma2 21 0 0>;
> +				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> @@ -770,7 +771,7 @@ lpuart6: serial at 425a0000 {
>  				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
>  				clock-names = "ipg";
> -				dmas = <&edma2 24 0 1>, <&edma2 23 0 0>;
> +				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> @@ -813,7 +814,7 @@ sai2: sai at 42650000 {
>  					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
>  					 <&clk IMX93_CLK_DUMMY>;
>  				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
> -				dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
> +				dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> @@ -826,7 +827,7 @@ sai3: sai at 42660000 {
>  					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
>  					 <&clk IMX93_CLK_DUMMY>;
>  				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
> -				dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
> +				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> @@ -845,7 +846,7 @@ xcvr: xcvr at 42680000 {
>  					 <&clk IMX93_CLK_DUMMY>,
>  					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
>  				clock-names = "ipg", "phy", "spba", "pll_ipg";
> -				dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
> +				dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> @@ -856,7 +857,7 @@ lpuart7: serial at 42690000 {
>  				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
>  				clock-names = "ipg";
> -				dmas = <&edma2 88 0 1>, <&edma2 87 0 0>;
> +				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> @@ -867,7 +868,7 @@ lpuart8: serial at 426a0000 {
>  				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
>  				clock-names = "ipg";
> -				dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
> +				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> 
> -- 
> 2.37.1
> 



More information about the linux-arm-kernel mailing list