[PATCH v2 14/26] media: dvb-frontends: drx39xyj: Use min macro

[Ricardo Ribalda]

Simplifies the code.

Found by cocci:

drivers/media/dvb-frontends/drx39xyj/drxj.c:1447:23-24: WARNING opportunity for min()
drivers/media/dvb-frontends/drx39xyj/drxj.c:1662:21-22: WARNING opportunity for min()
drivers/media/dvb-frontends/drx39xyj/drxj.c:1685:24-25: WARNING opportunity for min()

Signed-off-by: Ricardo Ribalda <ribalda at chromium.org>
---
 drivers/media/dvb-frontends/drx39xyj/drxj.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/media/dvb-frontends/drx39xyj/drxj.c b/drivers/media/dvb-frontends/drx39xyj/drxj.c
index 1ef53754bc03..6fcaf07e1b82 100644
--- a/drivers/media/dvb-frontends/drx39xyj/drxj.c
+++ b/drivers/media/dvb-frontends/drx39xyj/drxj.c
@@ -1445,8 +1445,7 @@ static int drxdap_fasi_read_block(struct i2c_device_addr *dev_addr,
 
 	/* Read block from I2C **************************************************** */
 	do {
-		u16 todo = (datasize < DRXDAP_MAX_RCHUNKSIZE ?
-			      datasize : DRXDAP_MAX_RCHUNKSIZE);
+		u16 todo = min(datasize, DRXDAP_MAX_RCHUNKSIZE);
 
 		bufx = 0;
 
@@ -1660,7 +1659,7 @@ static int drxdap_fasi_write_block(struct i2c_device_addr *dev_addr,
 		   Address must be rewritten because HI is reset after data transport and
 		   expects an address.
 		 */
-		todo = (block_size < datasize ? block_size : datasize);
+		todo = min(block_size, datasize);
 		if (todo == 0) {
 			u16 overhead_size_i2c_addr = 0;
 			u16 data_block_size = 0;
@@ -1682,9 +1681,7 @@ static int drxdap_fasi_write_block(struct i2c_device_addr *dev_addr,
 				first_err = st;
 			}
 			bufx = 0;
-			todo =
-			    (data_block_size <
-			     datasize ? data_block_size : datasize);
+			todo = min(data_block_size, datasize);
 		}
 		memcpy(&buf[bufx], data, todo);
 		/* write (address if can do and) data */

-- 
2.44.0.769.g3c40516874-goog