[PATCH 1/3] dt-bindings: reset: Add Amlogic T7 Reset Controller

Thu Apr 18 14:03:02 PDT 2024

On 17/04/2024 21:08, Krzysztof Kozlowski wrote:
> On 16/04/2024 01:30, neil.armstrong at linaro.org wrote:
>> On 15/04/2024 12:31, Kelvin Zhang wrote:
>>>
>>> On 2024/4/13 02:03, Krzysztof Kozlowski wrote:
>>>> [ EXTERNAL EMAIL ]
>>>>
>>>> On 12/04/2024 19:57, Krzysztof Kozlowski wrote:
>>>>> On 12/04/2024 15:12, Neil Armstrong wrote:
>>>>>> Hi,
>>>>>>
>>>>>> On 29/03/2024 20:39, Krzysztof Kozlowski wrote:
>>>>>>> On 29/03/2024 10:17, Kelvin Zhang via B4 Relay wrote:
>>>>>>>> From: Zelong Dong <zelong.dong at amlogic.com>
>>>>>>>>
>>>>>>>> Add a new compatible and the related header file
>>>>>>>> for Amlogic T7 Reset Controller.
>>>>>>>>
>>>>>>>> Signed-off-by: Zelong Dong <zelong.dong at amlogic.com>
>>>>>>>> Signed-off-by: Kelvin Zhang <kelvin.zhang at amlogic.com>
>>>>>>>> ---
>>>>>>>>     .../bindings/reset/amlogic,meson-reset.yaml        |   1 +
>>>>>>>>     include/dt-bindings/reset/amlogic,t7-reset.h       | 197 +++++++++++++++++++++
>>>>>>>>     2 files changed, 198 insertions(+)
>>>>>>>>
>>>>>>>> diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
>>>>>>>> index f0c6c0df0ce3..fefe343e5afe 100644
>>>>>>>> --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
>>>>>>>> +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
>>>>>>>> @@ -19,6 +19,7 @@ properties:
>>>>>>>>           - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
>>>>>>>>           - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
>>>>>>>>           - amlogic,c3-reset # Reset Controller on C3 and compatible SoCs
>>>>>>>> +      - amlogic,t7-reset # Reset Controller on T7 and compatible SoCs
>>>>>>>>
>>>>>>>
>>>>>>> If there is going to be any resend, please drop the comment. It's not
>>>>>>> really helpful and makes it trickier to read.
>>>>>>>
>>>>>>>>       reg:
>>>>>>>>         maxItems: 1
>>>>>>>> diff --git a/include/dt-bindings/reset/amlogic,t7-reset.h b/include/dt-bindings/reset/amlogic,t7-reset.h
>>>>>>>> new file mode 100644
>>>>>>>> index 000000000000..ca4a832eeeec
>>>>>>>> --- /dev/null
>>>>>>>> +++ b/include/dt-bindings/reset/amlogic,t7-reset.h
>>>>>>>> @@ -0,0 +1,197 @@
>>>>>>>> +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
>>>>>>>> +/*
>>>>>>>> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
>>>>>>>> + */
>>>>>>>> +
>>>>>>>> +#ifndef _DT_BINDINGS_AMLOGIC_T7_RESET_H
>>>>>>>> +#define _DT_BINDINGS_AMLOGIC_T7_RESET_H
>>>>>>>> +
>>>>>>>> +/* RESET0 */
>>>>>>>> +/*                                        0-3     */
>>>>>>>
>>>>>>> I assume this matches existing drivers which do not use IDs but map the
>>>>>>> binding to hardware value? I remember we talked about changing it, so if
>>>>>>> something happened about this and it could be changed: please change.
>>>>>>
>>>>>> I'm not aware of such discussion, and I don't really see the issue...
>>>>>> thoses are IDs, and yes they match the Hardware offsets, and ?
>>>>>
>>>>> Bindings are not for hardware offsets/values/addresses. It's just not a
>>>>> binding.
>>>>>
>>>>> I quickly looked at your driver patch and it confirms: not a binding.
>>>>> Binding constant is used by the driver and DTS consumer.
>>>>>
>>>>> I am really sure we had this talk in the past, but could be I think
>>>>> about different platform. Since this is not a binding, I do not think
>>>>> claiming there is any ABI here is reasonable. Feel free to store them
>>>>> with other hardware values, like in DTS headers etc. We already moved to
>>>>> DTS headers several such "non-binding" constants.
>>>>
>>>> Un-acked.
>>>>
>>>> I looked at my archives and we did talk about it and you were CCed:
>>>>
>>>> https://lore.kernel.org/linux-devicetree/c088e01c-0714-82be-8347-6140daf56640@linaro.org/
>>>> simple-reset is an exception.
>>>>
>>>> So to recap:
>>>> That's not a binding. Don't add some real values to binding headers
>>>> because it is not a binding then.
>>
>> So what's exactly a binding then?
> 
> Binding headers is interface needed (necessary) between implementation
> (like Linux drivers) and DTS.
> 
>> random linear numbers that means nothing can be a binding
>> but registers numbers can't be ? why ? I still don't understand, why this suddenly gets problematic ?
> 
> There is no interface here. Drivers don't use them. It's not "suddenly"
> problematic, I commented on this year or two years ago and we also
> started moving such header-abusers out of bindings.
> 
>>
>>>>
>>>> https://lore.kernel.org/linux-devicetree/CAK8P3a1APzs74YTcZ=m43G3zrmwJZKcYSTvV5eDDQX-37UY7Tw@mail.gmail.com/
>>>> https://lore.kernel.org/linux-devicetree/CAK8P3a0fDJQvGLEtG0fxLkG08Fh9V7LEMPsx4AaS+2Ldo_xWxw@mail.gmail.com/
>>>> https://lore.kernel.org/linux-devicetree/b60f5fd2-dc48-9375-da1c-ffcfe8292683@linaro.org/
>>>> https://lore.kernel.org/linux-devicetree/418c5f0c-5279-41f5-3705-345ec9a97ea2@linaro.org/
>>>> https://lore.kernel.org/all/201401111415.29395.arnd@arndb.de/
>>>>
>>> Got it. Will delete amlogic,t7-reset.h and use the hardware numbers
>>> directly in the DT. >
>>> Hi Neil,
>>> As you know, Amlogic reset controller is divided into several groups: reset0, reset1, ..., resetN. I'd like to discuss the rationality of splitting the one device node of reset controller into device nodes according to the groups. Then we can use the bit number within the 'resets' property.
>>> reset0: reset-controller at 2000 {
>>> ...
>>> };
>>>
>>> reset1: reset-controller at 2004 {
>>> ...
>>> };
>>> ...
>>>
>>> What do you think?
>>
>> No since you'll basically add a node per register, you need to add a node for the while reset HW function, another
>> solution would be to split the phandle arguments in 2, the first first would be the reset bank, and the second one
>> the reset line for the bank.
>>
>> But still it's a regression in readability to drop the macros, until gpios or pins the reset number doesn't mean anything per se.
> 
> 
> What stops you from putting the header in the DTS? Just like others are
> doing?

Ok so now I understand, Kelvin just keep the header but move it in arch/arm64/boot/dts/amlogic along the DT patch and drop it from the bindings patch.

Thanks,
Neil

> 
> Best regards,
> Krzysztof
> 