[PATCH net-next v2 3/5] net: sparx5: add port mirroring implementation
Daniel Machon
daniel.machon at microchip.com
Thu Apr 18 09:56:36 PDT 2024
The hardware supports three independent mirroring probes. Each probe can
be configured to mirror rx or tx traffic (direction).
Using tc matchall, it is now possible to add a source port and a monitor
port to a mirror probe. Depending on the mirror direction, rx or tx
traffic from a source port will be mirrored to the monitor port.
A single source port can be a member of multiple mirror probes.
Signed-off-by: Daniel Machon <daniel.machon at microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund at microchip.com>
---
drivers/net/ethernet/microchip/sparx5/Makefile | 3 +-
.../net/ethernet/microchip/sparx5/sparx5_main.h | 12 ++
.../net/ethernet/microchip/sparx5/sparx5_mirror.c | 196 +++++++++++++++++++++
3 files changed, 210 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/microchip/sparx5/Makefile b/drivers/net/ethernet/microchip/sparx5/Makefile
index 1cb1cc3f1a85..b68fe9c9a656 100644
--- a/drivers/net/ethernet/microchip/sparx5/Makefile
+++ b/drivers/net/ethernet/microchip/sparx5/Makefile
@@ -10,7 +10,8 @@ sparx5-switch-y := sparx5_main.o sparx5_packet.o \
sparx5_switchdev.o sparx5_calendar.o sparx5_ethtool.o sparx5_fdma.o \
sparx5_ptp.o sparx5_pgid.o sparx5_tc.o sparx5_qos.o \
sparx5_vcap_impl.o sparx5_vcap_ag_api.o sparx5_tc_flower.o \
- sparx5_tc_matchall.o sparx5_pool.o sparx5_sdlb.o sparx5_police.o sparx5_psfp.o
+ sparx5_tc_matchall.o sparx5_pool.o sparx5_sdlb.o sparx5_police.o \
+ sparx5_psfp.o sparx5_mirror.o
sparx5-switch-$(CONFIG_SPARX5_DCB) += sparx5_dcb.o
sparx5-switch-$(CONFIG_DEBUG_FS) += sparx5_vcap_debugfs.o
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.h b/drivers/net/ethernet/microchip/sparx5/sparx5_main.h
index 4de37a5387a4..5d026e1670f5 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.h
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.h
@@ -228,12 +228,20 @@ struct sparx5_mdb_entry {
u16 pgid_idx;
};
+struct sparx5_mall_mirror_entry {
+ u32 idx;
+ struct sparx5_port *port;
+};
+
struct sparx5_mall_entry {
struct list_head list;
struct sparx5_port *port;
unsigned long cookie;
enum flow_action_id type;
bool ingress;
+ union {
+ struct sparx5_mall_mirror_entry mirror;
+ };
};
#define SPARX5_PTP_TIMEOUT msecs_to_jiffies(10)
@@ -551,6 +559,10 @@ void sparx5_psfp_init(struct sparx5 *sparx5);
void sparx5_new_base_time(struct sparx5 *sparx5, const u32 cycle_time,
const ktime_t org_base_time, ktime_t *new_base_time);
+/* sparx5_mirror.c */
+int sparx5_mirror_add(struct sparx5_mall_entry *entry);
+void sparx5_mirror_del(struct sparx5_mall_entry *entry);
+
/* Clock period in picoseconds */
static inline u32 sparx5_clk_period(enum sparx5_core_clockfreq cclock)
{
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_mirror.c b/drivers/net/ethernet/microchip/sparx5/sparx5_mirror.c
new file mode 100644
index 000000000000..540bde15eeff
--- /dev/null
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_mirror.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Microchip Sparx5 Switch driver
+ *
+ * Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#include "sparx5_main.h"
+#include "sparx5_main_regs.h"
+#include "sparx5_tc.h"
+
+#define SPX5_MIRROR_PROBE_MAX 3
+#define SPX5_MIRROR_DISABLED 0
+#define SPX5_MIRROR_EGRESS 1
+#define SPX5_MIRROR_INGRESS 2
+#define SPX5_MIRROR_MONITOR_PORT_DEFAULT 65
+#define SPX5_QFWD_MP_OFFSET 9 /* Mirror port offset in the QFWD register */
+
+/* Convert from bool ingress/egress to mirror direction */
+static u32 sparx5_mirror_to_dir(bool ingress)
+{
+ return ingress ? SPX5_MIRROR_INGRESS : SPX5_MIRROR_EGRESS;
+}
+
+/* Get ports belonging to this mirror */
+static u64 sparx5_mirror_port_get(struct sparx5 *sparx5, u32 idx)
+{
+ return (u64)spx5_rd(sparx5, ANA_AC_PROBE_PORT_CFG1(idx)) << 32 |
+ spx5_rd(sparx5, ANA_AC_PROBE_PORT_CFG(idx));
+}
+
+/* Add port to mirror (only front ports) */
+static void sparx5_mirror_port_add(struct sparx5 *sparx5, u32 idx, u32 portno)
+{
+ u32 val, reg = portno;
+
+ val = BIT(do_div(reg, 32));
+
+ if (reg == 0)
+ return spx5_rmw(val, val, sparx5, ANA_AC_PROBE_PORT_CFG(idx));
+ else
+ return spx5_rmw(val, val, sparx5, ANA_AC_PROBE_PORT_CFG1(idx));
+}
+
+/* Delete port from mirror (only front ports) */
+static void sparx5_mirror_port_del(struct sparx5 *sparx5, u32 idx, u32 portno)
+{
+ u32 val, reg = portno;
+
+ val = BIT(do_div(reg, 32));
+
+ if (reg == 0)
+ return spx5_rmw(0, val, sparx5, ANA_AC_PROBE_PORT_CFG(idx));
+ else
+ return spx5_rmw(0, val, sparx5, ANA_AC_PROBE_PORT_CFG1(idx));
+}
+
+/* Check if mirror contains port */
+static bool sparx5_mirror_contains(struct sparx5 *sparx5, u32 idx, u32 portno)
+{
+ return (sparx5_mirror_port_get(sparx5, idx) & BIT_ULL(portno)) != 0;
+}
+
+/* Check if mirror is empty */
+static bool sparx5_mirror_is_empty(struct sparx5 *sparx5, u32 idx)
+{
+ return sparx5_mirror_port_get(sparx5, idx) == 0;
+}
+
+/* Get direction of mirror */
+static u32 sparx5_mirror_dir_get(struct sparx5 *sparx5, u32 idx)
+{
+ u32 val = spx5_rd(sparx5, ANA_AC_PROBE_CFG(idx));
+
+ return ANA_AC_PROBE_CFG_PROBE_DIRECTION_GET(val);
+}
+
+/* Set direction of mirror */
+static void sparx5_mirror_dir_set(struct sparx5 *sparx5, u32 idx, u32 dir)
+{
+ spx5_rmw(ANA_AC_PROBE_CFG_PROBE_DIRECTION_SET(dir),
+ ANA_AC_PROBE_CFG_PROBE_DIRECTION, sparx5,
+ ANA_AC_PROBE_CFG(idx));
+}
+
+/* Set the monitor port for this mirror */
+static void sparx5_mirror_monitor_set(struct sparx5 *sparx5, u32 idx,
+ u32 portno)
+{
+ spx5_rmw(QFWD_FRAME_COPY_CFG_FRMC_PORT_VAL_SET(portno),
+ QFWD_FRAME_COPY_CFG_FRMC_PORT_VAL, sparx5,
+ QFWD_FRAME_COPY_CFG(idx + SPX5_QFWD_MP_OFFSET));
+}
+
+/* Get the monitor port of this mirror */
+static u32 sparx5_mirror_monitor_get(struct sparx5 *sparx5, u32 idx)
+{
+ u32 val = spx5_rd(sparx5,
+ QFWD_FRAME_COPY_CFG(idx + SPX5_QFWD_MP_OFFSET));
+
+ return QFWD_FRAME_COPY_CFG_FRMC_PORT_VAL_GET(val);
+}
+
+/* Check if port is the monitor port of this mirror */
+static bool sparx5_mirror_has_monitor(struct sparx5 *sparx5, u32 idx,
+ u32 portno)
+{
+ return sparx5_mirror_monitor_get(sparx5, idx) == portno;
+}
+
+/* Get a suitable mirror for this port */
+static int sparx5_mirror_get(struct sparx5_port *sport,
+ struct sparx5_port *mport, u32 dir, u32 *idx)
+{
+ struct sparx5 *sparx5 = sport->sparx5;
+ u32 i;
+
+ /* Check if this port is already used as a monitor port */
+ for (i = 0; i < SPX5_MIRROR_PROBE_MAX; i++)
+ if (sparx5_mirror_has_monitor(sparx5, i, sport->portno))
+ return -EINVAL;
+
+ /* Check if existing mirror can be reused
+ * (same direction and monitor port).
+ */
+ for (i = 0; i < SPX5_MIRROR_PROBE_MAX; i++) {
+ if (sparx5_mirror_dir_get(sparx5, i) == dir &&
+ sparx5_mirror_has_monitor(sparx5, i, mport->portno)) {
+ *idx = i;
+ return 0;
+ }
+ }
+
+ /* Return free mirror */
+ for (i = 0; i < SPX5_MIRROR_PROBE_MAX; i++) {
+ if (sparx5_mirror_is_empty(sparx5, i)) {
+ *idx = i;
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+
+int sparx5_mirror_add(struct sparx5_mall_entry *entry)
+{
+ u32 mirror_idx, dir = sparx5_mirror_to_dir(entry->ingress);
+ struct sparx5_port *sport, *mport;
+ struct sparx5 *sparx5;
+ int err;
+
+ /* Source port */
+ sport = entry->port;
+ /* monitor port */
+ mport = entry->mirror.port;
+ sparx5 = sport->sparx5;
+
+ if (sport->portno == mport->portno)
+ return -EINVAL;
+
+ err = sparx5_mirror_get(sport, mport, dir, &mirror_idx);
+ if (err)
+ return err;
+
+ if (sparx5_mirror_contains(sparx5, mirror_idx, sport->portno))
+ return -EEXIST;
+
+ /* Add port to mirror */
+ sparx5_mirror_port_add(sparx5, mirror_idx, sport->portno);
+
+ /* Set direction of mirror */
+ sparx5_mirror_dir_set(sparx5, mirror_idx, dir);
+
+ /* Set monitor port for mirror */
+ sparx5_mirror_monitor_set(sparx5, mirror_idx, mport->portno);
+
+ entry->mirror.idx = mirror_idx;
+
+ return 0;
+}
+
+void sparx5_mirror_del(struct sparx5_mall_entry *entry)
+{
+ struct sparx5_port *port = entry->port;
+ struct sparx5 *sparx5 = port->sparx5;
+ u32 mirror_idx = entry->mirror.idx;
+
+ sparx5_mirror_port_del(sparx5, mirror_idx, port->portno);
+ if (!sparx5_mirror_is_empty(sparx5, mirror_idx))
+ return;
+
+ sparx5_mirror_dir_set(sparx5, mirror_idx, SPX5_MIRROR_DISABLED);
+
+ sparx5_mirror_monitor_set(sparx5,
+ mirror_idx,
+ SPX5_MIRROR_MONITOR_PORT_DEFAULT);
+}
--
2.34.1
More information about the linux-arm-kernel
mailing list