[PATCH 10/10] arm64: dts: imx8qm-mek: add fec2 support

Francesco Dolcini francesco at dolcini.it
Mon Apr 15 23:52:36 PDT 2024


On Mon, Apr 15, 2024 at 03:46:46PM -0400, Frank Li wrote:
> Add fec2 support.
> 
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 40 ++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> index da17161055179..84372c060e200 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> @@ -382,6 +391,19 @@ ethphy1: ethernet-phy at 1 {
>  	};
>  };
>  
> +&fec2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec2>;
> +	phy-mode = "rgmii-txid";
> +	phy-handle = <&ethphy1>;
> +	phy-supply = <&reg_fec2_supply>;
> +	fsl,magic-packet;
this is supposed to be just before status, as per DT style guidelines.

> +	nvmem-cells = <&fec_mac1>;
> +	nvmem-cell-names = "mac-address";
> +	rx-internal-delay-ps = <2000>;
> +	status = "okay";
> +};

Francesco




More information about the linux-arm-kernel mailing list