[PATCH v3 0/2] arm64: dts: rockchip: Add Radxa ZERO 3W/3E

[Jonas Karlman]

This series adds initial support for the Radxa ZERO 3W/3E boards.

The Radxa ZERO 3W/3E is an ultra-small, high-performance single board
computer based on the Rockchip RK3566, with a compact form factor and
rich interfaces.

Schematic for ZERO 3W and ZERO 3E can be found at:
https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_v1110_schematic.pdf
https://dl.radxa.com/zero3/docs/hw/3e/radxa_zero_3e_v1200_schematic.pdf

Changes in v2:
- Collect acked-by tag
- Add to Makefile
- Add patch to fix #sound-dai-cells warning

Changes in v3:
- Fix devicetree spelling
- Sort hdmi-con, leds, pmic at 20 and regulator at 40 nodes
- Change to regulator-off-in-suspend for vdd_logic
- Drop patch to fix #sound-dai-cells warning, similar patch [1] already
  exists

[1] https://lore.kernel.org/linux-rockchip/3a035c16-75b5-471d-aa9d-e91c2bb9f8d0@gmail.com/

Jonas Karlman (2):
  dt-bindings: arm: rockchip: Add Radxa ZERO 3W/3E
  arm64: dts: rockchip: Add Radxa ZERO 3W/3E

 .../devicetree/bindings/arm/rockchip.yaml     |   7 +
 arch/arm64/boot/dts/rockchip/Makefile         |   2 +
 .../dts/rockchip/rk3566-radxa-zero-3e.dts     |  41 ++
 .../dts/rockchip/rk3566-radxa-zero-3w.dts     |  26 +
 .../boot/dts/rockchip/rk3566-radxa-zero3.dtsi | 443 ++++++++++++++++++
 5 files changed, 519 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3e.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3w.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-zero3.dtsi

-- 
2.43.2