[PATCH v2 4/4] arm64: dts: qcom: Add PSCI SYSTEM_RESET2 types for qcm6490-idp

[Dmitry Baryshkov]

On Sun, 14 Apr 2024 at 22:32, Elliot Berman <quic_eberman at quicinc.com> wrote:
>
> Add nodes for the vendor-defined system resets. "bootloader" will cause
> device to reboot and stop in the bootloader's fastboot mode. "edl" will
> cause device to reboot into "emergency download mode", which permits
> loading images via the Firehose protocol.
>
> Co-developed-by: Shivendra Pratap <quic_spratap at quicinc.com>
> Signed-off-by: Shivendra Pratap <quic_spratap at quicinc.com>
> Signed-off-by: Elliot Berman <quic_eberman at quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> index e4bfad50a669..a966f6c8dd7c 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> @@ -126,6 +126,11 @@ debug_vm_mem: debug-vm at d0600000 {
>                 };
>         };
>
> +       psci {

Please use a label instead. Otherwise it looks as if you are adding
new device node.

> +               mode-bootloader = <0x10001 0x2>;
> +               mode-edl = <0 0x1>;
> +       };
> +
>         vph_pwr: vph-pwr-regulator {
>                 compatible = "regulator-fixed";
>                 regulator-name = "vph_pwr";
>
> --
> 2.34.1
>
>


-- 
With best wishes
Dmitry