[PATCH v3 2/2] arm64: dts: rockchip: Add one VEPU121 to rk3588

Emmanuel Gil Peyrot linkmauve at linkmauve.fr
Fri Apr 12 08:15:11 PDT 2024


The TRM (version 1.0 page 385) lists five VEPU121 cores, but only four
interrupts are listed (on page 24), and the driver would expose them all
as different video nodes so only one of them is exposed for now.

Signed-off-by: Emmanuel Gil Peyrot <linkmauve at linkmauve.fr>
---
 arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 29 +++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 87b83c87bd55..5c6cc4cd81df 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -2488,6 +2488,35 @@ gpio4: gpio at fec50000 {
 		};
 	};
 
+	/*
+	 * Currently only one of the four JPEG encoders is exposed, this
+	 * reduces the optimal throughput by four.
+	 *
+	 * Once the driver is made to expose all four devices as a single video
+	 * node, the rest can be enabled again, see the full patch here:
+	 * https://lore.kernel.org/linux-media/20240327134115.424846-1-linkmauve@linkmauve.fr/T/#m3a6df0ba15e4af40b998b0ff2a02b0dd0d730c8e
+	 */
+
+	jpeg_enc0: video-codec at fdba0000 {
+		compatible = "rockchip,rk3588-vepu121", "rockchip,rk3568-vepu";
+		reg = <0x0 0xfdba0000 0x0 0x800>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_JPEG_ENCODER0>, <&cru HCLK_JPEG_ENCODER0>;
+		clock-names = "aclk", "hclk";
+		iommus = <&jpeg_enc0_mmu>;
+		power-domains = <&power RK3588_PD_VDPU>;
+	};
+
+	jpeg_enc0_mmu: iommu at fdba0800 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdba0800 0x0 0x40>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_JPEG_ENCODER0>, <&cru HCLK_JPEG_ENCODER0>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3588_PD_VDPU>;
+		#iommu-cells = <0>;
+	};
+
 	av1d: video-codec at fdc70000 {
 		compatible = "rockchip,rk3588-av1-vpu";
 		reg = <0x0 0xfdc70000 0x0 0x800>;
-- 
2.44.0




More information about the linux-arm-kernel mailing list