[PATCH v5 12/12] ARM: dts: aspeed: Harma: Modify GPIO line name

Peter Yin peteryin.openbmc at gmail.com
Fri Apr 12 02:16:00 PDT 2024


Add:
"reset-cause-platrst", "cpu0-err-alert", "leakage-detect-alert",
"presence-post-card", "ac-power-button", "P0_I3C_APML_ALERT_L",
"irq-uv-detect-alert", "irq-hsc-alert", "cpu0-prochot-alert",
"cpu0-thermtrip-alert", "reset-cause-pcie", "pvdd11-ocp-alert"

Rename:
"power-cpu-good" to "host0-ready",
"host-ready-n" to "post-end-n

Signed-off-by: Peter Yin <peteryin.openbmc at gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-harma.dts  | 38 ++++++++++++++-----
 1 file changed, 29 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index a5abb16e5d8b..e7f4823ca4b3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -332,6 +332,12 @@ gpio at 31 {
 		reg = <0x31>;
 		gpio-controller;
 		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"","","","",
+		"","","presence-cmm","",
+		"","","","",
+		"","","","";
 	};
 
 	i2c-mux at 71 {
@@ -471,7 +477,8 @@ &gpio0 {
 	/*A0-A7*/	"","","","","","","","",
 	/*B0-B7*/	"","","","",
 			"bmc-spi-mux-select-0","led-identify","","",
-	/*C0-C7*/	"","","","","","","","",
+	/*C0-C7*/	"reset-cause-platrst","","","","",
+			"cpu0-err-alert","","",
 	/*D0-D7*/	"","","sol-uart-select","","","","","",
 	/*E0-E7*/	"","","","","","","","",
 	/*F0-F7*/	"","","","","","","","",
@@ -480,7 +487,8 @@ &gpio0 {
 	/*I0-I7*/	"","","","","","","","",
 	/*J0-J7*/	"","","","","","","","",
 	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","",
+			"leakage-detect-alert","","","",
 	/*M0-M7*/	"","","","","","","","",
 	/*N0-N7*/	"led-postcode-0","led-postcode-1",
 			"led-postcode-2","led-postcode-3",
@@ -499,7 +507,16 @@ &gpio0 {
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","presence-post-card","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "ac-power-button","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
 };
 
 &sgpiom0 {
@@ -548,10 +565,10 @@ &sgpiom0 {
 	"","reset-control-cpu0-p1-mux",
 	"","reset-control-e1s-mux",
 	"power-host-good","reset-control-mb-mux",
-	"power-cpu-good","reset-control-smb-e1s-0",
+	"host0-ready","reset-control-smb-e1s-0",
 	/*E0-E3 line 64-71*/
 	"","reset-control-smb-e1s-1",
-	"host-ready-n","reset-control-srst",
+	"post-end-n","reset-control-srst",
 	"presence-e1s-0","reset-control-usb-hub",
 	"","reset-control",
 	/*E4-E7 line 72-79*/
@@ -602,13 +619,16 @@ &sgpiom0 {
 	"SLOT_ID_BCB_2","",
 	"SLOT_ID_BCB_3","",
 	/*K0-K3 line 160-167*/
-	"","","","","","","","",
+	"","","","","","","P0_I3C_APML_ALERT_L","",
 	/*K4-K7 line 168-175*/
-	"","","","","","","","",
+	"","","","","","","irq-uv-detect-alert","",
 	/*L0-L3 line 176-183*/
-	"","","","","","","","",
+	"irq-hsc-alert","",
+	"cpu0-prochot-alert","",
+	"cpu0-thermtrip-alert","",
+	"reset-cause-pcie","",
 	/*L4-L7 line 184-191*/
-	"","","","","","","","",
+	"pvdd11-ocp-alert","","","","","","","",
 	/*M0-M3 line 192-199*/
 	"","","","","","","","",
 	/*M4-M7 line 200-207*/
-- 
2.25.1




More information about the linux-arm-kernel mailing list