[PATCH 05/18] i2c: davinci: remove printout on handled timeouts

[Wolfram Sang]

I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout.

Signed-off-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
---
 drivers/i2c/busses/i2c-davinci.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 02b3b1160fb0..7ae611120cfa 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -489,7 +489,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 	time_left = wait_for_completion_timeout(&dev->cmd_complete,
 						dev->adapter.timeout);
 	if (!time_left) {
-		dev_err(dev->dev, "controller timed out\n");
 		i2c_recover_bus(adap);
 		dev->buf_len = 0;
 		return -ETIMEDOUT;
-- 
2.43.0