[PATCH 01/18] i2c: at91-master: remove printout on handled timeouts

[Wolfram Sang]

I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout.

Signed-off-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
---
 drivers/i2c/busses/i2c-at91-master.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
index d311981d3e60..ee3b469ddfb9 100644
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -591,7 +591,6 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 					      dev->adapter.timeout);
 	if (time_left == 0) {
 		dev->transfer_status |= at91_twi_read(dev, AT91_TWI_SR);
-		dev_err(dev->dev, "controller timed out\n");
 		at91_init_twi_bus(dev);
 		ret = -ETIMEDOUT;
 		goto error;
-- 
2.43.0