[PATCH v2] arm64: dts: mediatek: mt8192: Add missing trip point in thermal zone

[AngeloGioacchino Del Regno]

Il 10/04/24 10:40, Hsin-Te Yuan ha scritto:
> According to Documentation/driver-api/thermal/power_allocator.rst, there
> should be two passive trip points. Adding the missing trip point to
> ensure that the governor works optimally.
> 
> Fixes: c7a728051f4e ("arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones")
> Signed-off-by: Hsin-Te Yuan <yuanhsinte at chromium.org>

That's better - but while I can agree about setting a general temperature
for that, I still have a few questions and requests:

1. Why is this 68°C? Was that value provided by MediaTek, or was it calculated?
  1b. If this was calculated, please, can you explain how?

2. The power allocator documentation also says that the governor works good
    when a "sustainable dissipatable power" parameter is fed to it through the
    `sustainable-power` devicetree property (with that being strictly board
    specific and never SoC-global, as that depends on the form factor and on
    the cooling method of the machine), can you please also add the right
    sustainable power indication to the Chromebook devicetrees?
    In the MT8192 specific case, that's mt8192-asurada.dtsi.

3. I just noticed that MT8192 is not the only one that would be affected by
    the issue that you're describing in this commit; can you please perform a
    similar change on the others, if parameters are known?

Thanks,
Angelo

> ---
> Changes in v2:
> - Clearify the reason of adding another passive trip point
> - Link to v1: https://lore.kernel.org/r/20240410-upstream-torvalds-master-v1-1-852e903f0cec@chromium.org
> ---
>   arch/arm64/boot/dts/mediatek/mt8192.dtsi | 40 ++++++++++++++++++++++++++++++++
>   1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> index 05e401670bced..08d8bccc84669 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> @@ -1959,6 +1959,11 @@ cpu0-thermal {
>   			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>;
>   
>   			trips {
> +				cpu0_thres: trip-point {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
>   				cpu0_alert: trip-alert {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> @@ -1989,6 +1994,11 @@ cpu1-thermal {
>   			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>;
>   
>   			trips {
> +				cpu1_thres: trip-point {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
>   				cpu1_alert: trip-alert {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> @@ -2019,6 +2029,11 @@ cpu2-thermal {
>   			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>;
>   
>   			trips {
> +				cpu2_thres: trip-point {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
>   				cpu2_alert: trip-alert {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> @@ -2049,6 +2064,11 @@ cpu3-thermal {
>   			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>;
>   
>   			trips {
> +				cpu3_thres: trip-point {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
>   				cpu3_alert: trip-alert {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> @@ -2079,6 +2099,11 @@ cpu4-thermal {
>   			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>;
>   
>   			trips {
> +				cpu4_thres: trip-point {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
>   				cpu4_alert: trip-alert {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> @@ -2109,6 +2134,11 @@ cpu5-thermal {
>   			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>;
>   
>   			trips {
> +				cpu5_thres: trip-point {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
>   				cpu5_alert: trip-alert {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> @@ -2139,6 +2169,11 @@ cpu6-thermal {
>   			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>;
>   
>   			trips {
> +				cpu6_thres: trip-point {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
>   				cpu6_alert: trip-alert {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> @@ -2169,6 +2204,11 @@ cpu7-thermal {
>   			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>;
>   
>   			trips {
> +				cpu7_thres: trip-point {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
>   				cpu7_alert: trip-alert {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> 
> ---
> base-commit: 20cb38a7af88dc40095da7c2c9094da3873fea23
> change-id: 20240410-upstream-torvalds-master-40aeff5416c7
> 
> Best regards,