[PATCH 3/4] arm64: dts: ti: k3-j721e-main: Add the MAIN domain watchdog instances

[Kumar, Udit]

Hi Neha

On 3/26/2024 5:57 PM, Neha Malcom Francis wrote:
> There are 10 watchdog instances in the MAIN domain:
> 	* one each for the 2 A72 cores
> 	* one for the GPU core
> 	* one for the C7x core
> 	* one each for the 2 C66x cores
> 	* one each for the 4 R5F cores
>
> Currently, the devicetree only describes watchdog instances for the A72
> cores and enables them. Describe the remaining but reserve them as they
> will be used by their respective firmware.
>
> Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 93 +++++++++++++++++++++++
>   1 file changed, 93 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> index c7eafbc862f9..d8930b8ea8ec 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> @@ -2157,6 +2157,99 @@ watchdog1: watchdog at 2210000 {
>   		assigned-clock-parents = <&k3_clks 253 5>;
>   	};
>   

Looking at TRM, SPRUIJ7*3–December 2018–Revised March 2019,

Table 12-22646. RTI Instances, says There is gap in numbering

RTI0, RTI1, RTI15 and so on

IMO, labels for watchdog should be as per TRM.

eg watchdog2 to watchdog15, But I don't have strong opinion on either .

Let maintainer suggest on this



> +	/*
> +	 * The following RTI instances are coupled with MCU R5Fs, c7x and
> +	 * GPU so keeping them reserved as these will be used by their
> +	 * respective firmware
> +	 */
> +	watchdog2: watchdog at 22f0000 {
> +		compatible = "ti,j7-rti-wdt";
> +		reg = <0x00 0x22f0000 0x00 0x100>;
> +		clocks = <&k3_clks 257 1>;
> +		power-domains = <&k3_pds 257 TI_SCI_PD_EXCLUSIVE>;
> +		assigned-clocks = <&k3_clks 257 1>;
> +		assigned-clock-parents = <&k3_clks 257 5>;
> +		/* reserved for GPU */
> +		status = "reserved";
> +	};

Please help me to understand, where from you got it for GPU,

May be I am looking at wrong data, Again above TRM

Table 12-22645. RTI Hardware Requests. RTI-15 says esm0

> +
> +	watchdog3: watchdog at 2300000 {
> +		compatible = "ti,j7-rti-wdt";
> +		reg = <0x00 0x2300000 0x00 0x100>;
> +		clocks = <&k3_clks 256 1>;
> +		power-domains = <&k3_pds 256 TI_SCI_PD_EXCLUSIVE>;
> +		assigned-clocks = <&k3_clks 256 1>;
> +		assigned-clock-parents = <&k3_clks 256 5>;
> +		/* reserved for C7X */
> +		status = "reserved";

This I see in above table for Compute Cluster


> +	};
> +
> +	watchdog4: watchdog at 2380000 {
> +		compatible = "ti,j7-rti-wdt";
> +		reg = <0x00 0x2380000 0x00 0x100>;
> +		clocks = <&k3_clks 254 1>;
> +		power-domains = <&k3_pds 254 TI_SCI_PD_EXCLUSIVE>;
> +		assigned-clocks = <&k3_clks 254 1>;
> +		assigned-clock-parents = <&k3_clks 254 5>;
> +		/* reserved for C66X_0 */
> +		status = "reserved";
> +	};
> +
> +	watchdog5: watchdog at 2390000 {
> +		compatible = "ti,j7-rti-wdt";
> +		reg = <0x00 0x2390000 0x00 0x100>;
> +		clocks = <&k3_clks 255 1>;
> +		power-domains = <&k3_pds 255 TI_SCI_PD_EXCLUSIVE>;
> +		assigned-clocks = <&k3_clks 255 1>;
> +		assigned-clock-parents = <&k3_clks 255 5>;
> +		/* reserved for C66X_1 */
> +		status = "reserved";
> +	};
> +
> +	watchdog6: watchdog at 23c0000 {
> +		compatible = "ti,j7-rti-wdt";
> +		reg = <0x00 0x23c0000 0x00 0x100>;
> +		clocks = <&k3_clks 258 1>;
> +		power-domains = <&k3_pds 258 TI_SCI_PD_EXCLUSIVE>;
> +		assigned-clocks = <&k3_clks 258 1>;
> +		assigned-clock-parents = <&k3_clks 258 5>;
> +		/* reserved for MAIN_R5F0_0 */

TRM says, this covers both MAIN_R5F0_0 and MAIN_R5F0_1.

Suggest , if split is done at fw level

> +		status = "reserved";
> +	};
> +
> +	watchdog7: watchdog at 23d0000 {
> +		compatible = "ti,j7-rti-wdt";
> +		reg = <0x00 0x23d0000 0x00 0x100>;
> +		clocks = <&k3_clks 259 1>;
> +		power-domains = <&k3_pds 259 TI_SCI_PD_EXCLUSIVE>;
> +		assigned-clocks = <&k3_clks 259 1>;
> +		assigned-clock-parents = <&k3_clks 259 5>;
> +		/* reserved for MAIN_R5F0_1 */
> +		status = "reserved";

TRM says, this covers both MAIN_R5F0_0 and MAIN_R5F0_1.

Suggest , if split is done at fw level

> +	};
> +
> +	watchdog8: watchdog at 23e0000 {
> +		compatible = "ti,j7-rti-wdt";
> +		reg = <0x00 0x23e0000 0x00 0x100>;
> +		clocks = <&k3_clks 260 1>;
> +		power-domains = <&k3_pds 260 TI_SCI_PD_EXCLUSIVE>;
> +		assigned-clocks = <&k3_clks 260 1>;
> +		assigned-clock-parents = <&k3_clks 260 5>;
> +		/* reserved for MAIN_R5F1_0 */
> +		status = "reserved";
> +	};


TRM says, this covers both MAIN_R5F1_0 and MAIN_R5F1_1.

Suggest , if split is done at fw level

> +
> +	watchdog9: watchdog at 23f0000 {
> +		compatible = "ti,j7-rti-wdt";
> +		reg = <0x00 0x23f0000 0x00 0x100>;
> +		clocks = <&k3_clks 261 1>;
> +		power-domains = <&k3_pds 261 TI_SCI_PD_EXCLUSIVE>;
> +		assigned-clocks = <&k3_clks 261 1>;
> +		assigned-clock-parents = <&k3_clks 261 5>;
> +		/* reserved for MAIN_R5F1_1 */

TRM says, this covers both MAIN_R5F1_0 and MAIN_R5F1_1.

Suggest , if split is done at fw level

> +		status = "reserved";
> +	};
> +
>   	main_r5fss0: r5fss at 5c00000 {
>   		compatible = "ti,j721e-r5fss";
>   		ti,cluster-mode = <1>;