[PATCH v4 2/2] phy: add driver for MediaTek XFI T-PHY

Jacob Keller jacob.e.keller at intel.com
Tue Apr 9 17:15:57 PDT 2024



On 4/8/2024 7:24 PM, Daniel Golle wrote:
> Add driver for MediaTek's XFI T-PHY which can be found in the MT7988
> SoC. The XFI T-PHY is a 10 Gigabit/s Ethernet SerDes PHY with muxes on
> the internal side to be used with either USXGMII PCS or LynxI PCS,
> depending on the selected PHY interface mode.
> 
> The PHY can operates only in PHY_MODE_ETHERNET, the submode is one of
> PHY_INTERFACE_MODE_* corresponding to the supported modes:
> 
>  * USXGMII                 \
>  * 10GBase-R                }- USXGMII PCS - XGDM  \
>  * 5GBase-R                /                        \
>                                                      }- Ethernet MAC
>  * 2500Base-X              \                        /
>  * 1000Base-X               }- LynxI PCS - GDM     /
>  * Cisco SGMII (MAC side)  /
> 
> I chose the name XFI T-PHY because names of functions dealing with the
> phy in the vendor driver are prefixed "xfi_pextp_".
> 
> The register space used by the phy is called "pextp" in the vendor
> sources, which could be read as "_P_CI _ex_press _T_-_P_hy", and that
> is quite misleading as this phy isn't used for anything related to
> PCIe, so I wanted to find a better name.
> 
> XFI is still somehow related (as in: you would find the relevant
> places using grep in the vendor driver when looking for that) and the
> term seemed to at least somehow be aligned with the function of that
> phy: Dealing with (up to) 10 Gbit/s Ethernet serialized differential
> signals.
> 
> In order to work-around a performance issue present on the first of
> two XFI T-PHYs found in MT7988, special tuning is applied which can
> be selected by adding the 'mediatek,usxgmii-performance-errata'
> property to the device tree node, similar to how the vendor driver is
> doing that too.
> 
> There is no documentation for most registers used for the
> analog/tuning part, however, most of the registers have been partially
> reverse-engineered from MediaTek's SDK implementation (see links, an
> opaque sequence of 32-bit register writes) and descriptions for all
> relevant digital registers and bits such as resets and muxes have been
> supplied by MediaTek.
> 

Not an expert in PHY drivers, or this particular hardware, but nothing
seems out of place to me.

Reviewed-by: Jacob Keller <jacob.e.keller at intel.com>

I appreciate the links to the vendor driver code and your explanations
of how and why this differs.

> Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/b72d6cba92bf9e29fb035c03052fa1e86664a25b/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_sgmii.c
> Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/dec96a1d9b82cdcda4a56453fd0b453d4cab4b85/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> Signed-off-by: Daniel Golle <daniel at makrotopia.org>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> ---
> v4:
>  Functional changes:
>   * Include fix for SGMII, found in vendor SDK[1].
> 
>  Non-functional/cosmetic changes:
>   * Separate allocation and assignment of bools in mtk_xfi_tphy_setup().
>   * Remove unnecessary parentheses.
>   * Explain naming in commit message.
>   * Drop unnecessary dependencies from Kconfig.
>   * Provide URL references to source of magic values.
>   * Add kernel-doc comments.
> 
> [1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/b72d6cba92bf9e29fb035c03052fa1e86664a25b
> 
> v3: no changes
> 
> v2:
>  * use IO helpers from mtk-io.h instead of rolling my own
>  * use devm_clk_bulk_get()
>  * yse devm_platform_ioremap_resource()
>  * unify name and description everywhere
>  * invert bool is_xgmii into bool use_lynxi_pcs and add comments
>    describing the meaning of each of the stack variables
>  * not much we can do about remaining magic values unless MTK provides
>    definitions for them
> 
>  MAINTAINERS                             |   1 +
>  drivers/phy/mediatek/Kconfig            |  11 +
>  drivers/phy/mediatek/Makefile           |   1 +
>  drivers/phy/mediatek/phy-mtk-xfi-tphy.c | 451 ++++++++++++++++++++++++
>  4 files changed, 464 insertions(+)
>  create mode 100644 drivers/phy/mediatek/phy-mtk-xfi-tphy.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a4924fda31829b..98b4b391d224f9 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13870,6 +13870,7 @@ L:	netdev at vger.kernel.org
>  S:	Maintained
>  F:	drivers/net/phy/mediatek-ge-soc.c
>  F:	drivers/net/phy/mediatek-ge.c
> +F:	drivers/phy/mediatek/phy-mtk-xfi-tphy.c
>  
>  MEDIATEK I2C CONTROLLER DRIVER
>  M:	Qii Wang <qii.wang at mediatek.com>
> diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
> index 3849b7c87d2872..60e00057e8bc71 100644
> --- a/drivers/phy/mediatek/Kconfig
> +++ b/drivers/phy/mediatek/Kconfig
> @@ -13,6 +13,17 @@ config PHY_MTK_PCIE
>  	  callback for PCIe GEN3 port, it supports software efuse
>  	  initialization.
>  
> +config PHY_MTK_XFI_TPHY
> +	tristate "MediaTek 10GE SerDes XFI T-PHY driver"
> +	depends on ARCH_MEDIATEK || COMPILE_TEST
> +	depends on OF
> +	select GENERIC_PHY
> +	help
> +	  Say 'Y' here to add support for MediaTek XFI T-PHY driver.
> +	  The driver provides access to the Ethernet SerDes T-PHY supporting
> +	  1GE and 2.5GE modes via the LynxI PCS, and 5GE and 10GE modes
> +	  via the USXGMII PCS found in MediaTek SoCs with 10G Ethernet.
> +
>  config PHY_MTK_TPHY
>  	tristate "MediaTek T-PHY Driver"
>  	depends on ARCH_MEDIATEK || COMPILE_TEST
> diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
> index f6e24a47e08153..1b8088df71e845 100644
> --- a/drivers/phy/mediatek/Makefile
> +++ b/drivers/phy/mediatek/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_PHY_MTK_PCIE)		+= phy-mtk-pcie.o
>  obj-$(CONFIG_PHY_MTK_TPHY)		+= phy-mtk-tphy.o
>  obj-$(CONFIG_PHY_MTK_UFS)		+= phy-mtk-ufs.o
>  obj-$(CONFIG_PHY_MTK_XSPHY)		+= phy-mtk-xsphy.o
> +obj-$(CONFIG_PHY_MTK_XFI_TPHY)		+= phy-mtk-xfi-tphy.o
>  
>  phy-mtk-hdmi-drv-y			:= phy-mtk-hdmi.o
>  phy-mtk-hdmi-drv-y			+= phy-mtk-hdmi-mt2701.o
> diff --git a/drivers/phy/mediatek/phy-mtk-xfi-tphy.c b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
> new file mode 100644
> index 00000000000000..3e3af7f7a3fdf5
> --- /dev/null
> +++ b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
> @@ -0,0 +1,451 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * MediaTek 10GE SerDes XFI T-PHY driver
> + *
> + * Copyright (c) 2024 Daniel Golle <daniel at makrotopia.org>
> + *                    Bc-bocun Chen <bc-bocun.chen at mediatek.com>
> + * based on mtk_usxgmii.c and mtk_sgmii.c found in MediaTek's SDK (GPL-2.0)
> + * Copyright (c) 2022 MediaTek Inc.
> + * Author: Henry Yen <henry.yen at mediatek.com>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/io.h>
> +#include <linux/clk.h>
> +#include <linux/reset.h>
> +#include <linux/phy.h>
> +#include <linux/phy/phy.h>
> +
> +#include "phy-mtk-io.h"
> +
> +#define MTK_XFI_TPHY_NUM_CLOCKS		2
> +
> +#define REG_DIG_GLB_70			0x0070
> +#define  XTP_PCS_RX_EQ_IN_PROGRESS(x)	FIELD_PREP(GENMASK(25, 24), (x))
> +#define  XTP_PCS_MODE_MASK		GENMASK(17, 16)
> +#define  XTP_PCS_MODE(x)		FIELD_PREP(GENMASK(17, 16), (x))
> +#define  XTP_PCS_RST_B			BIT(15)
> +#define  XTP_FRC_PCS_RST_B		BIT(14)
> +#define  XTP_PCS_PWD_SYNC_MASK		GENMASK(13, 12)
> +#define  XTP_PCS_PWD_SYNC(x)		FIELD_PREP(XTP_PCS_PWD_SYNC_MASK, (x))
> +#define  XTP_PCS_PWD_ASYNC_MASK		GENMASK(11, 10)
> +#define  XTP_PCS_PWD_ASYNC(x)		FIELD_PREP(XTP_PCS_PWD_ASYNC_MASK, (x))
> +#define  XTP_FRC_PCS_PWD_ASYNC		BIT(8)
> +#define  XTP_PCS_UPDT			BIT(4)
> +#define  XTP_PCS_IN_FR_RG		BIT(0)
> +
> +#define REG_DIG_GLB_F4			0x00f4
> +#define  XFI_DPHY_PCS_SEL		BIT(0)
> +#define   XFI_DPHY_PCS_SEL_SGMII	FIELD_PREP(XFI_DPHY_PCS_SEL, 1)
> +#define   XFI_DPHY_PCS_SEL_USXGMII	FIELD_PREP(XFI_DPHY_PCS_SEL, 0)
> +#define  XFI_DPHY_AD_SGDT_FRC_EN	BIT(5)
> +
> +#define REG_DIG_LN_TRX_40		0x3040
> +#define  XTP_LN_FRC_TX_DATA_EN		BIT(29)
> +#define  XTP_LN_TX_DATA_EN		BIT(28)
> +
> +#define REG_DIG_LN_TRX_B0		0x30b0
> +#define  XTP_LN_FRC_TX_MACCK_EN		BIT(5)
> +#define  XTP_LN_TX_MACCK_EN		BIT(4)
> +
> +#define REG_ANA_GLB_D0			0x90d0
> +#define  XTP_GLB_USXGMII_SEL_MASK	GENMASK(3, 1)
> +#define  XTP_GLB_USXGMII_SEL(x)		FIELD_PREP(GENMASK(3, 1), (x))
> +#define  XTP_GLB_USXGMII_EN		BIT(0)
> +
> +/**
> + * struct mtk_xfi_tphy - run-time data of the XFI phy instance
> + * @base: IO memory area to access phy registers.
> + * @dev: Kernel device used to output prefixed debug info.
> + * @reset: Reset control corresponding to the phy instance.
> + * @clocks: All clocks required for the phy to operate.
> + * @da_war: Enables work-around for 10GBase-R mode.
> + */
> +struct mtk_xfi_tphy {
> +	void __iomem		*base;
> +	struct device		*dev;
> +	struct reset_control	*reset;
> +	struct clk_bulk_data	clocks[MTK_XFI_TPHY_NUM_CLOCKS];
> +	bool			da_war;
> +};
> +
> +/**
> + * mtk_xfi_tphy_setup() - Setup phy for specified interface mode.
> + * @xfi_tphy: XFI phy instance.
> + * @interface: Ethernet interface mode
> + *
> + * The setup function is the condensed result of combining the 5 functions which
> + * setup the phy in MediaTek's GPL licensed public SDK sources. They can be found
> + * in mtk_sgmii.c[1] as well as mtk_usxgmii.c[2].
> + *
> + * Many magic values have been replaced by register and bit definitions, however,
> + * that has not been possible in all cases. While the vendor driver uses a
> + * sequence of 32-bit writes, here we try to only modify the actually required
> + * bits.
> + *
> + * [1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/b72d6cba92bf9e29fb035c03052fa1e86664a25b/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_sgmii.c
> + *
> + * [2]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/dec96a1d9b82cdcda4a56453fd0b453d4cab4b85/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> + */
> +static void mtk_xfi_tphy_setup(struct mtk_xfi_tphy *xfi_tphy,
> +			       phy_interface_t interface)
> +{
> +	bool is_1g, is_2p5g, is_5g, is_10g, da_war, use_lynxi_pcs;
> +
> +	/* shorthands for specific clock speeds depending on interface mode */
> +	is_1g = interface == PHY_INTERFACE_MODE_1000BASEX ||
> +		interface == PHY_INTERFACE_MODE_SGMII;
> +	is_2p5g = interface == PHY_INTERFACE_MODE_2500BASEX;
> +	is_5g = interface == PHY_INTERFACE_MODE_5GBASER;
> +	is_10g = interface == PHY_INTERFACE_MODE_10GBASER ||
> +		 interface == PHY_INTERFACE_MODE_USXGMII;
> +
> +	/* Is overriding 10GBase-R tuning value required? */
> +	da_war = xfi_tphy->da_war && (interface == PHY_INTERFACE_MODE_10GBASER);
> +
> +	/* configure input mux to either
> +	 *  - USXGMII PCS (64b/66b coding) for 5G/10G
> +	 *  - LynxI PCS (8b/10b coding) for 1G/2.5G
> +	 */
> +	use_lynxi_pcs = is_1g || is_2p5g;
> +
> +	dev_dbg(xfi_tphy->dev, "setting up for mode %s\n", phy_modes(interface));
> +
> +	/* Setup PLL setting */
> +	mtk_phy_update_bits(xfi_tphy->base + 0x9024, 0x100000, is_10g ? 0x0 : 0x100000);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x2020, 0x202000, is_5g ? 0x202000 : 0x0);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x2030, 0x500, is_1g ? 0x0 : 0x500);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x2034, 0xa00, is_1g ? 0x0 : 0xa00);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x2040, 0x340000, is_1g ? 0x200000 : 0x140000);
> +
> +	/* Setup RXFE BW setting */
> +	mtk_phy_update_bits(xfi_tphy->base + 0x50f0, 0xc10, is_1g ? 0x410 : is_5g ? 0x800 : 0x400);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x50e0, 0x4000, is_5g ? 0x0 : 0x4000);
> +
> +	/* Setup RX CDR setting */
> +	mtk_phy_update_bits(xfi_tphy->base + 0x506c, 0x30000, is_5g ? 0x0 : 0x30000);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x5070, 0x670000, is_5g ? 0x620000 : 0x50000);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x5074, 0x180000, is_5g ? 0x180000 : 0x0);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x5078, 0xf000400, is_5g ? 0x8000000 :
> +									0x7000400);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x507c, 0x5000500, is_5g ? 0x4000400 :
> +									0x1000100);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x5080, 0x1410, is_1g ? 0x400 : is_5g ? 0x1010 : 0x0);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x5084, 0x30300, is_1g ? 0x30300 :
> +							      is_5g ? 0x30100 :
> +								      0x100);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x5088, 0x60200, is_1g ? 0x20200 :
> +							      is_5g ? 0x40000 :
> +								      0x20000);
> +
> +	/* Setting RXFE adaptation range setting */
> +	mtk_phy_update_bits(xfi_tphy->base + 0x50e4, 0xc0000, is_5g ? 0x0 : 0xc0000);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x50e8, 0x40000, is_5g ? 0x0 : 0x40000);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x50ec, 0xa00, is_1g ? 0x200 : 0x800);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x50a8, 0xee0000, is_5g ? 0x800000 :
> +								       0x6e0000);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x6004, 0x190000, is_5g ? 0x0 : 0x190000);
> +
> +	if (is_10g)
> +		writel(0x01423342, xfi_tphy->base + 0x00f8);
> +	else if (is_5g)
> +		writel(0x00a132a1, xfi_tphy->base + 0x00f8);
> +	else if (is_2p5g)
> +		writel(0x009c329c, xfi_tphy->base + 0x00f8);
> +	else
> +		writel(0x00fa32fa, xfi_tphy->base + 0x00f8);
> +
> +	/* Force SGDT_OUT off and select PCS */
> +	mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_F4,
> +			    XFI_DPHY_AD_SGDT_FRC_EN | XFI_DPHY_PCS_SEL,
> +			    XFI_DPHY_AD_SGDT_FRC_EN |
> +			    (use_lynxi_pcs ? XFI_DPHY_PCS_SEL_SGMII :
> +					     XFI_DPHY_PCS_SEL_USXGMII));
> +
> +	/* Force GLB_CKDET_OUT */
> +	mtk_phy_set_bits(xfi_tphy->base + 0x0030, 0xc00);
> +
> +	/* Force AEQ on */
> +	writel(XTP_PCS_RX_EQ_IN_PROGRESS(2) | XTP_PCS_PWD_SYNC(2) | XTP_PCS_PWD_ASYNC(2),
> +	       xfi_tphy->base + REG_DIG_GLB_70);
> +
> +	usleep_range(1, 5);
> +	writel(XTP_LN_FRC_TX_DATA_EN, xfi_tphy->base + REG_DIG_LN_TRX_40);
> +
> +	/* Setup TX DA default value */
> +	mtk_phy_update_bits(xfi_tphy->base + 0x30b0, 0x30, 0x20);
> +	writel(0x00008a01, xfi_tphy->base + 0x3028);
> +	writel(0x0000a884, xfi_tphy->base + 0x302c);
> +	writel(0x00083002, xfi_tphy->base + 0x3024);
> +
> +	/* Setup RG default value */
> +	if (use_lynxi_pcs) {
> +		writel(0x00011110, xfi_tphy->base + 0x3010);
> +		writel(0x40704000, xfi_tphy->base + 0x3048);
> +	} else {
> +		writel(0x00022220, xfi_tphy->base + 0x3010);
> +		writel(0x0f020a01, xfi_tphy->base + 0x5064);
> +		writel(0x06100600, xfi_tphy->base + 0x50b4);
> +		if (interface == PHY_INTERFACE_MODE_USXGMII)
> +			writel(0x40704000, xfi_tphy->base + 0x3048);
> +		else
> +			writel(0x47684100, xfi_tphy->base + 0x3048);
> +	}
> +
> +	if (is_1g)
> +		writel(0x0000c000, xfi_tphy->base + 0x3064);
> +
> +	/* Setup RX EQ initial value */
> +	mtk_phy_update_bits(xfi_tphy->base + 0x3050, 0xa8000000,
> +			    (interface != PHY_INTERFACE_MODE_10GBASER) ? 0xa8000000 : 0x0);
> +	mtk_phy_update_bits(xfi_tphy->base + 0x3054, 0xaa,
> +			    (interface != PHY_INTERFACE_MODE_10GBASER) ? 0xaa : 0x0);
> +
> +	if (!use_lynxi_pcs)
> +		writel(0x00000f00, xfi_tphy->base + 0x306c);
> +	else if (is_2p5g)
> +		writel(0x22000f00, xfi_tphy->base + 0x306c);
> +	else
> +		writel(0x20200f00, xfi_tphy->base + 0x306c);
> +
> +	mtk_phy_update_bits(xfi_tphy->base + 0xa008, 0x10000, da_war ? 0x10000 : 0x0);
> +
> +	mtk_phy_update_bits(xfi_tphy->base + 0xa060, 0x50000, use_lynxi_pcs ? 0x50000 : 0x40000);
> +
> +	/* Setup PHYA speed */
> +	mtk_phy_update_bits(xfi_tphy->base + REG_ANA_GLB_D0,
> +			    XTP_GLB_USXGMII_SEL_MASK | XTP_GLB_USXGMII_EN,
> +			    is_10g ?  XTP_GLB_USXGMII_SEL(0) :
> +			    is_5g ?   XTP_GLB_USXGMII_SEL(1) :
> +			    is_2p5g ? XTP_GLB_USXGMII_SEL(2) :
> +				      XTP_GLB_USXGMII_SEL(3));
> +	mtk_phy_set_bits(xfi_tphy->base + REG_ANA_GLB_D0, XTP_GLB_USXGMII_EN);
> +
> +	/* Release reset */
> +	mtk_phy_set_bits(xfi_tphy->base + REG_DIG_GLB_70,
> +			 XTP_PCS_RST_B | XTP_FRC_PCS_RST_B);
> +	usleep_range(150, 500);
> +
> +	/* Switch to P0 */
> +	mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70,
> +			    XTP_PCS_IN_FR_RG |
> +			    XTP_FRC_PCS_PWD_ASYNC |
> +			    XTP_PCS_PWD_ASYNC_MASK |
> +			    XTP_PCS_PWD_SYNC_MASK |
> +			    XTP_PCS_UPDT,
> +			    XTP_PCS_IN_FR_RG |
> +			    XTP_FRC_PCS_PWD_ASYNC |
> +			    XTP_PCS_UPDT);
> +	usleep_range(1, 5);
> +
> +	mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_70, XTP_PCS_UPDT);
> +	usleep_range(15, 50);
> +
> +	if (use_lynxi_pcs) {
> +		/* Switch to Gen2 */
> +		mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70,
> +				    XTP_PCS_MODE_MASK | XTP_PCS_UPDT,
> +				    XTP_PCS_MODE(1) | XTP_PCS_UPDT);
> +	} else {
> +		/* Switch to Gen3 */
> +		mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70,
> +				    XTP_PCS_MODE_MASK | XTP_PCS_UPDT,
> +				    XTP_PCS_MODE(2) | XTP_PCS_UPDT);
> +	}
> +	usleep_range(1, 5);
> +
> +	mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_70, XTP_PCS_UPDT);
> +
> +	usleep_range(100, 500);
> +
> +	/* Enable MAC CK */
> +	mtk_phy_set_bits(xfi_tphy->base + REG_DIG_LN_TRX_B0, XTP_LN_TX_MACCK_EN);
> +	mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_F4, XFI_DPHY_AD_SGDT_FRC_EN);
> +
> +	/* Enable TX data */
> +	mtk_phy_set_bits(xfi_tphy->base + REG_DIG_LN_TRX_40,
> +			 XTP_LN_FRC_TX_DATA_EN | XTP_LN_TX_DATA_EN);
> +	usleep_range(400, 1000);
> +}
> +
> +/**
> + * mtk_xfi_tphy_set_mode() - Setup phy for specified interface mode.
> + *
> + * @phy: Phy instance.
> + * @mode: Only PHY_MODE_ETHERNET is supported.
> + * @submode: An Ethernet interface mode.
> + *
> + * Validate selected mode and call function mtk_xfi_tphy_setup().
> + *
> + * Return:
> + * * %0 - OK
> + * * %-EINVAL - invalid mode
> + */
> +static int mtk_xfi_tphy_set_mode(struct phy *phy, enum phy_mode mode, int
> +				 submode)
> +{
> +	struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
> +
> +	if (mode != PHY_MODE_ETHERNET)
> +		return -EINVAL;
> +
> +	switch (submode) {
> +	case PHY_INTERFACE_MODE_1000BASEX:
> +	case PHY_INTERFACE_MODE_2500BASEX:
> +	case PHY_INTERFACE_MODE_SGMII:
> +	case PHY_INTERFACE_MODE_5GBASER:
> +	case PHY_INTERFACE_MODE_10GBASER:
> +	case PHY_INTERFACE_MODE_USXGMII:
> +		mtk_xfi_tphy_setup(xfi_tphy, submode);
> +		return 0;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +/**
> + * mtk_xfi_tphy_reset() - Reset the phy.
> + *
> + * @phy: Phy instance.
> + *
> + * Reset the phy using the external reset controller.
> + *
> + * Return:
> + * %0 - OK
> + */
> +static int mtk_xfi_tphy_reset(struct phy *phy)
> +{
> +	struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
> +
> +	reset_control_assert(xfi_tphy->reset);
> +	usleep_range(100, 500);
> +	reset_control_deassert(xfi_tphy->reset);
> +	usleep_range(1, 10);
> +
> +	return 0;
> +}
> +
> +/**
> + * mtk_xfi_tphy_power_on() - Power-on the phy.
> + *
> + * @phy: Phy instance.
> + *
> + * Prepare and enable all clocks required for the phy to operate.
> + *
> + * Return:
> + * See clk_bulk_prepare_enable().
> + */
> +static int mtk_xfi_tphy_power_on(struct phy *phy)
> +{
> +	struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
> +
> +	return clk_bulk_prepare_enable(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
> +}
> +
> +/**
> + * mtk_xfi_tphy_power_off() - Power-off the phy.
> + *
> + * @phy: Phy instance.
> + *
> + * Disable and unprepare all clocks previously enabled.
> + *
> + * Return:
> + * See clk_bulk_prepare_disable().
> + */
> +static int mtk_xfi_tphy_power_off(struct phy *phy)
> +{
> +	struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
> +
> +	clk_bulk_disable_unprepare(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
> +
> +	return 0;
> +}
> +
> +static const struct phy_ops mtk_xfi_tphy_ops = {
> +	.power_on	= mtk_xfi_tphy_power_on,
> +	.power_off	= mtk_xfi_tphy_power_off,
> +	.set_mode	= mtk_xfi_tphy_set_mode,
> +	.reset		= mtk_xfi_tphy_reset,
> +	.owner		= THIS_MODULE,
> +};
> +
> +/**
> + * mtk_xfi_tphy_probe() - Probe phy instance from Device Tree.
> + * @pdev: Matching platform device.
> + *
> + * The probe function gets IO resource, clocks, reset controller and
> + * whether the DA work-around for 10GBase-R is required from Device Tree and
> + * allocates memory for holding that information in a struct mtk_xfi_tphy.
> + *
> + * Return:
> + * * %0       - OK
> + * * %-ENODEV - Missing associated Device Tree node (should never happen).
> + * * %-ENOMEM - Out of memory.
> + * * Any error value which devm_platform_ioremap_resource(),
> + *   devm_clk_bulk_get(), devm_reset_control_get_exclusive(),
> + *   devm_phy_create() or devm_of_phy_provider_register() may return.
> + */
> +static int mtk_xfi_tphy_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct phy_provider *phy_provider;
> +	struct mtk_xfi_tphy *xfi_tphy;
> +	struct phy *phy;
> +	int ret;
> +
> +	if (!np)
> +		return -ENODEV;
> +
> +	xfi_tphy = devm_kzalloc(&pdev->dev, sizeof(*xfi_tphy), GFP_KERNEL);
> +	if (!xfi_tphy)
> +		return -ENOMEM;
> +
> +	xfi_tphy->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(xfi_tphy->base))
> +		return PTR_ERR(xfi_tphy->base);
> +
> +	xfi_tphy->dev = &pdev->dev;
> +	xfi_tphy->clocks[0].id = "topxtal";
> +	xfi_tphy->clocks[1].id = "xfipll";
> +	ret = devm_clk_bulk_get(&pdev->dev, MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
> +	if (ret)
> +		return ret;
> +
> +	xfi_tphy->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> +	if (IS_ERR(xfi_tphy->reset))
> +		return PTR_ERR(xfi_tphy->reset);
> +
> +	xfi_tphy->da_war = of_property_read_bool(np, "mediatek,usxgmii-performance-errata");
> +
> +	phy = devm_phy_create(&pdev->dev, NULL, &mtk_xfi_tphy_ops);
> +	if (IS_ERR(phy))
> +		return PTR_ERR(phy);
> +
> +	phy_set_drvdata(phy, xfi_tphy);
> +	phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
> +
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id mtk_xfi_tphy_match[] = {
> +	{ .compatible = "mediatek,mt7988-xfi-tphy", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mtk_xfi_tphy_match);
> +
> +static struct platform_driver mtk_xfi_tphy_driver = {
> +	.probe = mtk_xfi_tphy_probe,
> +	.driver = {
> +		.name = "mtk-xfi-tphy",
> +		.of_match_table = mtk_xfi_tphy_match,
> +	},
> +};
> +module_platform_driver(mtk_xfi_tphy_driver);
> +
> +MODULE_DESCRIPTION("MediaTek 10GE SerDes XFI T-PHY driver");
> +MODULE_AUTHOR("Daniel Golle <daniel at makrotopia.org>");
> +MODULE_AUTHOR("Bc-bocun Chen <bc-bocun.chen at mediatek.com>");
> +MODULE_LICENSE("GPL");



More information about the linux-arm-kernel mailing list