[PATCH v3 01/18] ASoC: dt-bindings: mediatek,mt8365-afe: Add audio afe document

[Krzysztof Kozlowski]

On 09/04/2024 15:41, Alexandre Mergnat wrote:
> Add MT8365 audio front-end bindings
> 
> Signed-off-by: Alexandre Mergnat <amergnat at baylibre.com>
> ---

> +properties:
> +  compatible:
> +    const: mediatek,mt8365-afe-pcm
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#sound-dai-cells":
> +    const: 0
> +
> +  clocks:
> +    items:
> +      - description: 26M clock
> +      - description: mux for audio clock
> +      - description: audio i2s0 mck
> +      - description: audio i2s1 mck
> +      - description: audio i2s2 mck
> +      - description: audio i2s3 mck
> +      - description: engen 1 clock
> +      - description: engen 2 clock
> +      - description: audio 1 clock
> +      - description: audio 2 clock
> +      - description: mux for i2s0
> +      - description: mux for i2s1
> +      - description: mux for i2s2
> +      - description: mux for i2s3
> +
> +  clock-names:
> +    items:
> +      - const: top_clk26m_clk
> +      - const: top_audio_sel
> +      - const: audio_i2s0_m
> +      - const: audio_i2s1_m
> +      - const: audio_i2s2_m
> +      - const: audio_i2s3_m
> +      - const: engen1
> +      - const: engen2
> +      - const: aud1
> +      - const: aud2
> +      - const: i2s0_m_sel
> +      - const: i2s1_m_sel
> +      - const: i2s2_m_sel
> +      - const: i2s3_m_sel
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  mediatek,dmic-mode:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Indicates how many data pins are used to transmit two channels of PDM
> +      signal. 1 means two wires, 0 means one wire. Default value is 0.
> +    enum:
> +      - 0 # one wire
> +      - 1 # two wires
> +
> +  mediatek,topckgen:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: The phandle of the mediatek topckgen controller

Nothing improved, so again, so something which is not obvious. What is
it used for? Why AFE needs topckgen for example?

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - power-domains
> +  - mediatek,topckgen
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mediatek,mt8365-clk.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/power/mediatek,mt8365-power.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        afe at 11220000 {

Did you implement the comment or decided to keep afe?

BTW, whatever "consistency" you have in mind, it does not really matter
that much for that example. And for sure do not add incorrect code
intentionally just to fix it in next patch.



Best regards,
Krzysztof